background image

Removing Excess Humidity

You can change modes at any time.

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

If the atmosphere in your room is very humid or damp, you can
remove excess humidity without lowering the room temperature too
much.

1

If necessary, press the      (On/Off) button.

Result:

The POWER indicator on the indoor unit lights up.

The air conditioner starts up in the mode selected when 

the unit was last used.

The indoor unit beeps.

The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:

Plugged in

Stopped

It will start up normally after three minutes.

2

If the       is not displayed at the top of the remote control, 
press the MODE button on the remote control one or more times until it
appears.

Result:

The indoor unit beeps each time you press the MODE button.

The air conditioner runs in DRY mode.

3

To adjust the temperature, press the TEMPERATURE buttons one or
more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.

Result:

Each time you press the TEMPERATURE buttons: 

- The temperature is adjusted by 1°C
- The indoor unit beeps

The air conditioner starts removing the excess humidity; 

the quantity of air is adjusted automatically.

4

To control the direction of the air flow, refer to pages 16 and 17.

IM

PORTANT

E-

12

Summary of Contents for UPH2840E



























Reviews: