background image

English - 30

IMPORTANT WARRANTY INFORMATION 
REGARDING TELEVISION FORMAT 
VIEWING

 

See the warranty card for more information on 
warranty terms.

Wide screen format LED Displays (with 16:9 aspect 
ratios, the ratio of the screen width to height) are 
primarily designed to view wide screen format 
full-motion video. The images displayed on them 
should primarily be in the wide screen, 16:9 ratio 
format, or expanded to fill the screen, if your model 
offers this feature, with the images constantly in 
motion. Displaying stationary graphics and images 
on the screen, such as the dark sidebars on non-
expanded standard format television video and 
programming, should be limited to no more than 
5% of the total television viewing time per week.
Additionally, viewing other stationary images and 
text such as stock market crawls, video game 
displays, station logos, web sites or computer 
graphics and patterns, should be limited as 
described above for all televisions. Displaying 
stationary images that exceed the above guidelines 
can cause uneven aging of LED Displays that 
leave subtle, but permanent burned-in ghost 
images in the LED picture. To avoid this, vary the 
programming and images, and primarily display 
full screen moving images, not stationary patterns 
or dark bars. On LED models that offer picture 
sizing features, use these controls to view different 
formats as a full screen picture.
Be careful about the television formats you select 
and the length of time you view them. Uneven LED 
aging as a result of format selection and use, as 
well as burned in images, are not covered by your 
Samsung limited warranty.

 

SAMSUNG ELECTRONICS NORTH 
AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, 
exclusions and limitations of the original Limited 
Warranty supplied with Samsung Electronics 
(SAMSUNG) products, and the requirements, 
conditions, exclusions and limitations contained 
herein, SAMSUNG will additionally provide 
Warranty Repair Service in the United States 
on SAMSUNG products purchased in Canada, 
and in Canada on SAMSUNG products 
purchased in the United States, for the warranty 
period originally specified, and to the Original 
Purchaser only.

The above described warranty repairs must be 
performed by a SAMSUNG Authorized Service 
Center. Along with this Statement, the Original 
Limited Warranty Statement and a dated Bill of 
Sale as Proof of Purchase must be presented 
to the Service Center. Transportation to and 
from the Service Center is the responsibility of 
the purchaser. Conditions covered are limited 
only to manufacturing defects in material or 
workmanship, and only those encountered in 
normal use of the product.
Excluded, but not limited to, are any originally 
specified provisions for, in-home or on-site 
services, minimum or maximum repair times, 
exchanges or replacements, accessories, 
options, upgrades, or consumables.
For the location of a SAMSUNG Authorized 
Service Center, please call toll-free:

 

In the United States: 1-800-SAMSUNG (1-
800-726-7864)

 

In Canada: 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture 
files), still image elements (such as TV channel 
logos, stock or news bars at the screen bottom 
etc.), or programs in panorama or 4:3 image format 
on the screen. Constantly displaying still pictures 
can cause image burn-in on the LED screen, which 
will affect image quality. To reduce risk of this effect, 
please follow the recommendations below:

 

Avoid displaying the same TV channel for long 
periods.

 

Always try to display any image in full screen. 
Use the TV set’s picture format menu for the 
best possible match.

 

Reduce brightness and contrast to avoid the 
appearance of after-images.

 

Use all TV features designed to reduce image 
retention and screen burn. Refer to the 
e-Manual for details.

[UF6400-75inch-ZA]BN68-05122A-00ENG.indb   30

2013-03-06   �� 10:07:52

Summary of Contents for UN75F7100AF



































Reviews: