3-2
3. Disassembly and Reassemble
Description & Screws
Picture Description
3
Use Open Jig to release tape in corners and
all clips as indicated in red on sides and top &
bottom.
Gently lift up the Rear Cover starting at the top
being careful of function assembly at the bottom.
When the 4 points (
•
)Hook is broken.
Although the hook is broken, the appearance
of the Rear cover is no problem and Gap
problem is not appeard after re-assembly.
To prevent the Inner Hook's broken.
•
1. Catch the upper section of the rear cover.
2. Open the rear cover from top to bottom.
If the wire is bent, need to change the wire.
•
Jig Direction
Jig Direction
Jig Direction
Bottom
: 4 point Locking
Top
: 10 point Locking
L
: 6 point Locking
R
: 6 point Locking
Center
: 1 Point Locking
Panel Back Side View
•
55 inches
-
65 inches
-
