English - 17
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless
connection.
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem.
This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When
you play video over a IEEE 802.11b/g connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network through an access
point or AP (typically a wireless IP Sharer - router or modem) to transmit an encrypted security code called an access key.
Your TV is compatible with the following security protocols:
y
Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
y
Encryption Type: WEP, TKIP, AES
If you select Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP, TKIP or TKIP AES
(WPS2Mixed) on your AP or wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi
certification specifications.
Configuring the Network Connection - Wireless
The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure network
connections automatically. If your have a Static IP network, see your user’s manual for configuration instructions.
To configure your network connection for a network that uses DHCP, follow these steps:
1.
Connect your TV to your network as shown in the illustration
above.
2.
Turn on your TV, press the
MENU
button on your remote, and
the select
Network
→
Network Settings
.
3.
Select the
Wireless(General)
, press
ENTER
E
, and then
press
ENTER
E
again.
4.
The Network function searches for available wireless networks.
When done, it displays a list of the available networks.
5.
In the list of networks, press the
u
or
▼
button to select a
network, select
Next
, and then press
ENTER
E
.
6.
If you have selected a wireless router that has security, the
Security Key
screen appears. Enter the
Security key
(Security
key or PIN), select
Next
, and then press
ENTER
E
.
✎
When you enter the
Security Key
(Security key or PIN), use the
u
/
d
/
◄
/
►
buttons on your remote to select
numbers and characters.
7.
The Network connection screen appears and verifies the network connection. When the connection has been verified, the
“
Internet connection successful.
” message appears. Network set up is complete.
✎
For more detailed information, see “Wireless Network Connection” in the e-Manual.
The LAN Port on the Wall
LAN Cable (Not Supplied)
Wireless IP Sharer
(router having DHCP Server)
TV
Network Settings
Wired
Previous
Next
Cancel
Wireless(General)
WPS(PBC)
One Foot Connection
Select a network connection type.
Set up wireless network
by selecting your Wireless
Router. you may need to enter
security key depending on
the setting of the Wireless
Router.
[UD7000-NA]BN68-03435A-03L03.indb 17
2011-03-14 오후 6:45:05
