English - 5
Pairing the TV to the Samsung Smart Remote
When you turn on the TV for the first time, the
Samsung Smart Remote pairs
to the TV automatically. If the Samsung Smart Remote does not pair to the TV
automatically, point it at the remote control sensor of the TV, and then press
and hold the buttons labeled and
in the following figure simultaneously
for 3 seconds or more.
Installing batteries into the Samsung Smart Remote
To install the batteries, push the rear cover open in
the direction of the arrow and insert the batteries
as shown in the figure. Make sure that the positive
and negative ends are facing in the correct
direction.
N
Alkaline batteries are recommended for longer
battery life.
Using the TV Controller
You can turn on the TV with the
TV controller
button at the bottom of the TV, and then use the
Control Menu
. The
Control Menu appears when the button is pressed while the TV is On. For more information about its usage, refer to the
figure below.
:
Power off
:
Channel Up
:
Channel Down
:
Volume Up
:
Volume Down
:
Source
Control Menu
Press: Move
Press & Hold: Select
The
TV controller
is placed at the bottom of the TV.
TV controller
/ Remote control sensor
UKU6500R_ZS_BN68-07902A-01_L02.indb 5
2016-07-06 �� 1:10:22
