manualshive.com logo in svg

Samsung UN40HU6950F, Service Manual, Page: 74 / 81

Share
Download
Samsung UN40HU6950F Service Manual Download Page 74

4-7. Software Upgrade

Software Upgrade can be performed by downloading the. latest firmware from samsung.com to a USB memory device.

Current Version - The software already installed in the TV.

• 
Software is represented as ‘Year/Month/Day_Version’. 

4-7-1. How to Check the Software Version

Use the Main Menu

 

„

Click the "MENU" key in remote controller.

1. 

Select "Support" menu.

2. 

Locate the menu cursor "Software Upgrade" menu.

3. 

Click the "INFO" key.

4. 

Check the Main SW and Micom version.

 -

Use the Factory Mode

 

„

Option
Control
Debug
SVC
ADC/WB
Advanced

T-NT14UAKUC-xxxx
T-NT14UAUSS-xxxx
BT Version : xxxx
E-Manual : xxxx
Camera Version : xxxx
Blaster-version : ----

EDID SUCCESS
CALIB : AV/COMP/PC/HDMI/
Option : xxxx,US,6950,NONE
USB RS232C : OFF

DTP-SDAL-NT14U-MAIN-xxxx-xxxx
RFS : "NT14U 0147" K/2   201x-xx-xx
KERNEL : 142.1214, /
DTP-DTVTD-4612-01
Backend[NT72323]: FW[5xx]
TCON Version : ----

4-52 

4. Troubleshooting

Summary of Contents for UN40HU6950F


















































































Reviews:

No comments