- 2 -
Getting Started
Accessories
• Remote Control & Batteries (AAA x 2)
• Warranty Card / Safety Guide
• Wire-Holder Stand
• Owner’s Instructions
• Power Cord
Input Cables (Sold Separately)
• RS232
• Audio
• HDMI
• HDMI-DVI
• Component
• Composite (AV)
• Coaxial (RF)
✎
Check the cable before plug-in
Cable
Ports
HDMI
USB
Optical
Do not plug cable upside down.
Be sure to check before plug-in.
TV Controller (Panel Key)
Power on
Turns the TV on by pressing the controller in standby mode.
Adjusting the volume
Adjusts the volume by moving the controller from side to
side when the power is on.
Selecting a channel
Selects a channel by moving the controller up and down
when the power is on.
Using the function menu
Press the controller when the power is on, then the function
menu screen appears. If you press it again, the function
menu screen disappears.
Selecting the Media Play
Selects the
MEDIA.P
by moving the controller in the
function menu screen. The
Media Play
main screen
appears.
Selecting the MENU (
m
)
Selects the
MENU
(
m
) by moving the controller in the
function menu screen. The OSD(On Screen Display) of your
TV’s feature appears.
Selecting the Source
List (
s
)
Selects the
Source List
(
s
) by moving the controller in the
function menu screen. The
Source List
screen appears.
Power Off (
P
)
Selects the
Power Off
(
P
) to turn the TV off by moving the
controller in the function menu screen.
✎
Exits the menu when pressing the controller more than 1 second.
✎
When selecting the function by moving the controller to the up/down/left/
right directions, be sure not to press the controller. If you press it first, you
cannot operate it to move the up/down/left/right directions.
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of on-screen
prompts will assist in configuring basic settings. Press the
POWER
button.
Plug & Play
is available only when the Input source is set to
TV.
✎
Connecting the power cord and antenna. (refer to
‘Connections’)
Selecting a language
Select Language of the OSD.
Language
U
Move
E
Enter
Plug & Play
English
Español
Français
Select the desired OSD (On Screen
Display) language.
Selecting a Home Use mode
Select ‘Home Use’ when installing this TV in your home.
L
Move
E
Enter
Plug & Play
Home Use
Store Demo
• Select the
Home Use
mode.
Store
Demo
mode is for retail environments.
• When pressing TV controller, the
function menu screen appears. Select
the
MENU
(
m
) and press it more than 5
seconds using the controller. The
Store
Demo
mode is set. Cancel the
Store
Demo
by selecting
Source List
(
s
)
and pressing it more than 5 seconds.
Selecting an antenna
Select the Antenna source to memorize.
Air
Start
Cable
Start
Auto
Start
U
Move
E
Enter
m
Skip
Plug & Play
In
Cable
mode, you can select the correct
signal source among
STD
,
HRC
, and
IRC
by pressing the
▲
,
▼
,
◄
or
►
button.
Setting the Clock Mode
Set the Clock Mode.
Clock Mode
: Auto
Plug & Play
E
Enter
m
Skip
Set the
Clock Mode
automatically or
manually.
• If you select the
Auto
, set the
DST(Daylight Saving Time).
• On the DST screen, press
ENTER
E
,
then select whether to turn DST
(Daylight Savings Time) on or off. Select
the time zone where you live.
Viewing the HD Connection Guide
The connection method for the best HD screen quality is displayed.
Enjoy your TV.
Press the
ENTER
E
button.
TV Controller
Function menu
Remote control sensor
MEDIA.P
m R
P
Return
