4-19
4. Troubleshooting
4-1-8. No Video (Component)
Symptom
Audio is normal but no picture is displayed on the screen.
-
Major
checkpoints
Check the Component source
-
Check the chelsea.
-
This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.
-
Diagnostics
Does the component data appear at
TP - COMP1_Y, COMP1_PB, COMP1_PR
(Comp / Y, Pb, Pr) ?
Does the digital data appear at
TP - , O_TXCLK- ?
Yes
Yes
Yes
Yes
Check a set in the 'Stand-by mode'
Input the component source properly.
Please, Contact Tech support.
Check CN701.
Change the Main Assy.
26" : BN94-03399B
22"/19" : BN94-03399C
Check IC301 (SX1)
Change the Main Assy.
26" : BN94-03399B
22"/19" : BN94-03399C
No
No
No
No
No
Power indicator LED is off.
Lamp(Backlight) on, no video ?
Check the component source and
check the connection of component
cables(Y,Pb,Pr)?
Check the LVDS cable?
Check the T-Con B'd?
Replace the LCD panel?
5
2
Caution
Make sure to disconnect the power before working on the IP board.
Summary of Contents for UN19C4000PD
