Samsung UN FH6200F Series, Service Manual, Page: 25 / 74

4. Troubleshooting
4-1. Troubleshooting
4-1-1. Previous Check
Check the various cable connections first. 1.
Check to see if there is a burnt or damaged cable. -
Check to see if there is a disconnected or loose cable connection. -
Check to see if the cables are connected according to the connection diagram. -
Check the power input to the Main Board. 2.
How to distinguish if the problem is caused by 3. Main Board or T CON
No Video
-
If the problem is No Video but BLU is on and Indication LED is blinking repeatedly and faster than nomal booting,
replace the T-CON board.
Distorted Picture
-
Check the inner patterns.
For All mode •
X10+ Echo_FS FRC Post Picture Problem
OK OK NG Main Board or Signal Source
NG OK NG Main Board
NG NG NG Main Board or LVDS cable or T CON or Panel
Only for HDMI mode (additional check) •
HDMI Picture Problem
OK NG There is no problems after HDMI IC check HDMI source or HDMI jack.
NG NG There is no problems before HDMI IC check X10+ pattern or LVDS cable or T CON
4-1
4. Troubleshooting