Desktop computer
Connect to the USB port on your PC,
then install the supplied UF-80 program.
Connect the cable to the
RS-232C terminal on your PC.
C
AUTION
We recommend you to connect to USB port which is attached on computer main board.
(It can make troubles in extended front-side USB port or USB hub without power in
accordance with computers.) Be sure to use the USB cable shorter than 4.0 m.
N
OTE
RS-232C cable is not provided with the presenter. You can obtain one from your computer dealer.
Connecting to output device
USB connection
RS-232C connection
■
Connect a desktop PC and the presenter using USB
cable and install the supplied program. You can see
the projected image on the PC monitor and control
the image using the program.
■
RS-232C connection is available for advanced user.
If you connect a PC with RS-232C cable, you should
set up your PC and make your own program to
control the projected image on PC. Ask your dealer
for further details.
Connecting
to
output
device
P
AGE
17
UF-130DX(¿ „fi)0807 2008.08.27 4:28 PM ˘
` 17 MAC-1
