English - 7
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the
POWER
P
button.
Plug & Play
is available only when the
Source
is set to TV.
✎
Before turning on the TV, make sure the antenna cable is connected (p. 6).
1
Selecting the OSD
Language
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the desired OSD (On Screen Display) language.
2
Setting up the Network Set up your network connection. Press the
ENTER
E
button to start. If you do
not know your network set up information or want to set to it later, select
Skip
.
We suggest you skip network connection setup now and refer to “Network
menu” in the e-Manual for set up requirements and instructions, and the
Network Connection section of this manual (p. 13).
You can set up the network connection later using the Network menu.
3
Software Upgrade
Select Next to upgrade TV software. Your TV will automatically upgrade, if your
TV need a software upgrade. If you want to upgrade later, select the Skip. For
more information, refer to “Software Upgrade” (Preference
→
Support) in the
e-Manual.
✎
This may take some time, depending on network status.
4
Selecting the usage
mode
Press the
▲
or
▼
button to select
Home Use
, and then press the
ENTER
E
button twice.
✎
Select the
Home Use
mode.
Store Demo
mode is for retail environments.
5
Select Country
(Depending on the
country)
Press the
▲
or
▼
button, then press the
ENTER
E
button. Select the
appropriate country.
✎
After selecting the country in the
Country
menu, some models may
proceed with an additional option to setup the pin number.
✎
When you input the PIN number, 0-0-0-0 is not available.
6
Setting the
Clock
Mode
Set the
Clock Mode
automatically or manually.
Auto
: Select the time zone where you are located.
Manual
: Allows you to manually set the current date and time.
7
Selecting search
options for auto tuning
Press the
▲
or
▼
button, then press the
ENTER
E
button. Select the channel
source to memorise. When setting the antenna source to Cable, a step appears
allowing you to assign numerical values (channel frequencies) to the channels.
For more information, refer to
Channel
→
Auto Tuning
.
✎
When
Air
or
Cable
is selected first: After all
Air
or
Cable
channels are
stored, the step for storing
Satellite
channels is displayed.
✎
When
Satellite
is selected first: After all
Satellite
channels are stored, the
step for storing
Air
or
Cable
channels is displayed.
✎
Press the
ENTER
E
button at any time to interrupt the memorisation
process.
8
Enjoy your TV.
If you want to watch a broadcast Programme, select
Close
. If you want to enjoy
the
Smart Hub
, select the
Smart Hub
. The
Smart Hub
will start. For more
detailed information, refer to “Smart Hub” in the e-Manual.
If You Want to Reset This Feature...
Select
System
-
Plug & Play
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.
If you want to change the PIN number, use the
Change PIN
function.
You should do
Plug & Play
(
MENU
→
System
) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to “0-0-0-0”:
MUTE
→
8
→
2
→
4
→
POWER
(on).
[UD8000-XU]BN68-03442K-02Eng.indb 7
2011-05-02 오후 1:16:42
