English - 7
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the
POWER
P
button.
Plug & Play
is available only when the Input source is set to TV.
✎
Before turning on the TV, make sure the antenna cable is connected (p. 6).
1
Selecting the OSD
Language
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the desired OSD (On Screen Display) language.
2
Setting up the Network Set up your network connection. Press the
ENTER
E
button to start. If you do
not know your network set up information or want to set to it later, select
Skip
.
We suggest you skip network connection setup now and refer to “Network
menu” in the e-Manual for set up requirements and instructions, and the
Network Connection section of this manual (Page 13).
You can set up the network connection later using the Network menu.
3
Software upgrade
When network connection settings are complete, Software Upgrade is available.
Select
Next
to upgrade TV software. Your TV will automatically upgrade, if your
TV need a software upgrade. If you want to upgrade later, select the
Skip
. For
more information, refer to “Software Upgrade” (Preference
→
Support) in the
e-Manual.
✎
This may take some time, depending on network status.
4
Selecting the usage
mode
Press the
▲
or
▼
button to select
Home Use
, and then press the
ENTER
E
button twice.
Select the
Home Use
mode.
Store Demo
mode is for retail environments.
5
Setting the
Clock
Mode
Press the
▲
or
▼
button to select
Auto
or
Manual
, and then press
ENTER
E
twice.
✎
If you selected
Manual
, you’ll go to the
Date
and
Time
screen. Select
Date
or
Time
, and then press
ENTER
E
. Then, use the number buttons or the
▲
or
▼
button to set the date or time. Use the
◄
or
►
button to move
between entry fields. When done setting the
Date
and
Time
, select
Next
,
and then press
ENTER
E
.
6
Selecting search
options for auto tuning
Press the
▲
or
▼
button, then press the
ENTER
E
button. Select the channel
source to memorise. When setting the antenna source to Cable, a step appears
allowing you to assign numerical values (channel frequencies) to the channels.
For more information, refer to Channel
→
Auto Tuning.
✎
When Aerial or Cable is selected first: After all Aerial or Cable channels are
stored, the step for storing Satellite channels is displayed.
✎
When Satellite is selected first: After all Satellite channels are stored, the
step for storing Aerial or Cable channels is displayed.
✎
Press the
ENTER
E
button at any time to interrupt the memorisation
process.
7
Enjoy your TV.
If you want to watch a broadcast program, select
Close
. If you want to enjoy the
Smart Hub
, select the
Smart Hub
. The
Smart Hub
will start. For more detailed
information, refer to “Smart Hub” in the e-Manual.
If You Want to Reset This Feature...
Select
System
-
Plug & Play
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.”
If you want to change the PIN number, use the
Change PIN
function.
You should do
Plug & Play
(
MENU
→
System
) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to “0-0-0-0”:
POWER
(off)
→
MUTE
→
8
→
2
→
4
→
POWER
(on)
[UD6750-XU]BN68-03487K-00Eng.indb 7
2011-03-10 오전 9:18:54
