80
Setting satellite system
(
MENU/123
)
MENU
Broadcasting
Channel Settings
Satellite System
You can configure a set of satellite dish settings before performing a channel scan.
"
This function is only available on certain models in specific geographical areas.
Changing teletext language
(
MENU/123
)
MENU
Broadcasting
Channel Settings
Teletext Language
You can set or change the teletext language. To watch the teletext broadcast in your preferred
language, select a language to use in
Primary teletext
. If this language is not supported, you can
watch the teletext broadcast in your secondary preferred language set in
Secondary teletext
.
"
This function is only available on certain models in specific geographical areas.
Showing common interface menu
(
MENU/123
)
MENU
Broadcasting
Common Interface
You can view information about common interfaces.
●
CI Menu
Enables the user to select from the CAM-provided menu. Select the CI menu based on the menu
PC Card.
●
CAM video transcoding
Configures the setting to transcode the video codec from the CAM automatically. Turn it Off if
you do not want to use it.
"
You must use a CAM that supports video codec transcoding.
●
Application Info
Displays information about the CAM inserted into the CI slot and about the “CI or CI+ CARD”
inserted into the CAM. You can install the CAM any time, with or without the TV turned on.
●
CICAM PIN Manager
Manages Common Interface Common Access Module (CICAM) PIN. Save PIN or change stored
PIN and then set other PIN options.
