7
01
Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button.
Plug & Play
is available only when the
Input
source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the desired OSD (On Screen Display) language.
P
POWER
2
Selecting
Store Demo
or
Home Use
Press the
◄
or
►
button, then press the
ENTER
E
button.
y
Select the
Home Use
mode.
Store Demo
mode is for retail
environments.
y
To return unit’s settings from
Store Demo
to
Home Use
(standard):
Press the volume button on the TV. When you see the volume OSD,
press and hold
MENU
for 5 sec.
3
Selecting a country
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the appropriate country.
4
Selecting an antenna
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select
Air
or
Cable
.
5
Selecting a channel
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the channel source to memorise. When setting the antenna source to
Cable
, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to
Channel
→
Auto Store
(p. 13).
✎
Press the
ENTER
E
button at any time to interrupt the memorization process.
6
Setting the
Clock Mode
Set the
Clock Mode
automatically or manually.
Press the
▲
or
▼
button to select
Auto
, then press the
ENTER
E
button.
7
Time Zone
Press the
▲
or
▼
button to select the your time zone, then press the
ENTER
E
button.
(depending on the country)
8
Viewing the
HD Connection Guide
.
The connection method for the best HD screen quality is displayed.
9
Enjoy your TV.
Press the
ENTER
E
button.
If You Want to Reset This Feature...
Select
Setup - Plug & Play
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to
change the PIN number, use the
Change PIN
function.
ANT OUT
Power Input
VHF/UHF Antenna
or
Cable
[UC8000_32]BN68-02813C-00Eng.indb 7
2010-05-10 오후 12:00:38