22
English
Settings
6.
The product detects the wired connection,
verifies the network connection, and then
connects to the network.
7.
Press the (
OK
) button.
Ğ
Wired - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings
values manually.
Follow Steps 1 through 3 in Wired - Automatic,
and then follow these steps:
1.
Select
Network Status
. The product
searches for a network, and then displays the
connection failed message.
2.
On the bottom of the screen, select
IP
Settings
, and then press the (
OK
) button.
The
IP Settings
screen appears.
3.
Select the
IP Settings
field, and then press
the (
OK
) button.
4.
Select
Enter manually
in the
IP Settings
field, and then press the (
OK
) button.
5.
Select a parameter to enter (
IP Address
, for
example), and then press the (
OK
) button.
Use the
Up/Down
buttons on the remote
control to enter the numbers for the
parameter.
Use the
Left/Right
buttons on the remote
control to move from entry field to entry field
within a parameter. When done with one
parameter, press the (
OK
) button.
6.
Press the
Up
or
Down
button to move
to another parameter, and then enter the
numbers for that parameter following the
instructions in Step 5.
7.
Repeat Steps 5 and 6 until you have filled in
all parameters.
|NOTE |
\
You can get the Network parameters from your
Internet provider.
8.
When finished entering all the parameters,
select
OK
, and then press the (
OK
) button.
The product verifies the network connection
and then connects to the network.
Upgrading Software
This menu allows you to upgrade the product's
software for performance improvements or
additional services.
•
Never turn the product off or back on
manually during the update process.
1.
In the Home screen, select
Settings
, and
then press the (
OK
) button.
2.
Select
Support
, and then press the (
OK
)
button.
3.
Select
Software Update
, and then press the
(
OK
) button.
4.
To download update software and update
now, select
Update Now
, and then press the
(
OK
) button.
5.
To let the product download update software
automatically when available, select
Auto
Update
, and then press the (
OK
) button.
See "Auto Update" in the next column for
details.
|NOTES |
\
The upgrade is complete when the product
turns off, and then turns on again by itself.
\
Samsung Electronics takes no legal
responsibility for any product malfunction
caused by an unstable Internet connection
or consumer negligence during a Software
Update.
\
If you want to cancel the upgrade while the
upgrade software is downloading, press the
(
OK
) button.
\
This option requires an Internet connection.