Security
✎
The PIN input screen appears before the setup screen.
✎
Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the
PIN using the
Change PIN
option.
Channel Lock
: Lock channels in
Channel List
, to prevent
unauthorized users, such as children, from watching unsuitable
programme.
✎
Only available when the Input source is set to
TV
.
Change PIN
: Change your password required to set up the TV.
✎
If you forget the PIN code, press the remote control buttons in
the following sequence in Standby mode, which resets the PIN to
“0-0-0-0”:
MUTE
→
8
→
2
→
4
→
POWER
(on).
Eco Solution
■
Energy Saving
t
: This adjusts the brightness of the TV in order
to reduce power consumption. If you select
Picture Off
, the screen is
turned off, but the sound remains on. Press any button except volume
button to turn on the screen.
■
Eco Sensor For 5 series
: To enhance your power savings; the
picture settings will automatically adapt to the light in the room.
✎
If you adjust the
Backlight
, the
Eco Sensor
will be set to
Off
.
Min. Backlight
: When
Eco Sensor
is
On
, the minimum screen
brightness can be adjusted manually.
✎
If
Eco Sensor
is
On
, the display brightness may change (become
slightly darker in most cases) depending on the surrounding light
intensity.
■
No Signal Power Off
: To avoid unnecessary energy consumption, set
how long you want the TV to remain on if it’s not receiving a signal.
✎
Disabled when the PC is in power saving mode.
■
Auto Power Off
: The TV will be automatically turned off when no user
operation is received for 4 hours.
Auto Protection Time
■
Auto Protection Time
: If the screen remains idle with a still image
for a certain period of time defi ned by the user, the screen saver is
activated to prevent the formation of ghost images on the screen.
General
■
Game Mode
:
When connecting to a game console such as
PlayStation™ or Xbox™, you can enjoy a more realistic gaming
experience by selecting the game mode.
Precautions and limitations for game mode
−
To disconnect the game console and connect another external
device, set
Game Mode
to
Off
in the setup menu.
−
If you display the TV menu in
Game Mode
, the screen shakes
slightly.
Game Mode
is not available in
TV
mode.
After connecting the game console, set
Game Mode
to
On
to prevent poor picture quality. Unfortunately, you may notice
reduced picture quality.
■
Melody
: Set so that a melody plays when the TV is turned
Off
,
Low
,
Medium
and
High
.
✎
The
Melody
does not play.
−
When no sound is output from the TV because the
MUTE
button has been pressed.
−
When no sound is output from the TV because the volume has
been reduced to minimum with the
VOL –
button.
−
When the TV is turned off by
Sleep Timer
function.
Application Menu
❑
Using the Media Play
Enjoy photos, music and/or movie fi les saved on a
USB Mass Storage Class (MSC) device.
P
POWER
MEDIA.P
Connecting a USB Device
1.
Turn on your TV.
2.
Connect a USB device containing photo, music and/or movie fi les to
the
USB
jack on the side of the TV.
3.
When USB is connected to the TV, you can select
Media Play
.
Using the Media Play Menu
1.
Press the
MENU
button. Press the
▲
or
▼
button to select
Application
, then press the
ENTER
E
button.
2.
Press the
▲
or
▼
button to select
Media Play (USB)
, then press the
ENTER
E
button.
3.
Press the
◄
or
►
button to select an icon (
Videos, Music, Photos,
Settings
), then press the
ENTER
E
button.
✎
It might not work properly with unlicenced multimedia files.
✎
If you want to view detailed information of the file or connected
device, press
TOOLS
button in the file list, and then select
Detailed
Information
or
Device Information
.
✎
Need-to-Know List before using
Media Play (USB)
•
Supported fi le systems are FAT and NTFS.
•
Certain types of USB Digital camera and audio devices may not
be compatible with this TV.
•
Media Play
only supports USB Mass Storage Class (MSC)
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV’s
USB port. (LED 4000, 4001, 4020 series 32" : USB HDD is not
supported.)
•
Before connecting your device to the TV, please back up your fi les
to prevent them from damage or loss of data. SAMSUNG is not
responsible for any data fi le damage or data loss.
•
A USB device that requires high power may not be supported.
(LED 4000, 4001, 4020 series 32" : 0.5A)
(LED 5 series / LED 4100, 4105, 5100, 5105 models 32" and
above: 1A)
•
Do not disconnect the USB device while it is loading.
•
The higher the resolution of the image, the longer it takes to
display on the screen.
•
The maximum supported JPEG resolution is 15360 x 8640 pixels.
•
If a fi le is corrupted or the TV does not support the fi le type, the “Not
Supported File Format” message appears.
•
If a USB extension cable is used, the USB device may not be
recognized or the fi les on the device may not be read.
•
The TV cannot play MP3 fi les with DRM that have been downloaded
from a for-pay site. Digital Rights Management (DRM) is a
technology that supports the creation, distribution, and management
of digital content in an integrated and comprehensive way, including
protecting the rights and interests of content providers, preventing
illegal copying of contents, and managing billings and settlements.
•
PTP device is not supported.
•
If an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be
recognized or may malfunction.
•
If the TV has no input during the time set in
Auto Protection Time
,
the Screensaver will run.
•
The power-saving mode of some external hard disk drives may be
released automatically when your connect them to the TV.
•
If a USB device connected to the TV is not recognized, the list of
fi les on the device is corrupted, or a fi le in the list is not played,
connect the USB device to a PC, format the device, and check the
connection.
•
If a fi le you deleted from the PC is still found when you run
Media
Play
, use the “Empty the Recycle Bin” function on the PC to
permanently delete the fi le.
•
Photos
only supports sequential jpeg format.
•
The scene search and thumbnail functions are not supported in the
Videos
.
•
If the number of fi les and folders saved on a USB storage device is
approximately over 4000, the fi les and folders may not appear and
some folders may not be opened.
•
The maximum displayed number of fi les, including sub folders, in
one folder of USB storage device is 2000.
•
The media may not be playing smoothly when using the device
lower than USB 2.0.
•
The fi le name only works in supported menu language. The other
language is not displayed properly.
■
Videos
1.
Press the
◄
or
►
button to select
Videos
, then press the
ENTER
E
button in the
Media Play
menu.
2.
Press the
◄/►/▲/▼
buttons to select the desired video in the fi le list.
3.
Press the
ENTER
E
button or
(Play) button.
-
The selected file is displayed on the top with its playing time.
-
If video time information is unknown, playing time and the progress
bar are not displayed.
-
During video playback, you can search using the
◄
and
►
button.
-
You can use (
) (REW) and (
) (FF) buttons during playback.
✎
In this mode, you can play movie clips contained in a game, but you
cannot play the game itself.
Supported Subtitle Formats
-
External
Name
File extension
MPEG-4 timed text
.ttxt
SAMI
.smi
SubRip
.srt
SubViewer
.sub
Micro DVD
.sub or .txt
SubStation Alpha
.ssa
Advanced SubStation Alpha
.ass
-
Internal
Name
Container
Format
Xsub
AVI
Picture Format
SubStation Alpha
MKV
Text Format
Advanced SubStation Alpha
MKV
Text Format
SubRip
MKV
Text Format
MPEG-4 Timed text
MP4
Text Format
Supported Video Formats
File
Extension
Container
Video Codec
Resolution
Frame
rate(fps)
Bit rate(Mbps)
Audio Codec
*.mp4
MP4
DivX 3.11/4.x/5.1/6.0
1920x1080
6~30
30Mbps
MP3 / ADPCM
/ AAC
H264
1920x1080
6~30
30Mbps
AVC
1920x1080
6~30
30Mbps
MJPEG
640x480
6~30
10Mbps
*.avi
*.mkv"
"AVI
MKV"
DivX 3.11/4.x/5.1/6.0
1920x1080
6~30
30Mbps
MP3 / AC3 /
LPCM / ADPCM
/ DTS Core
MPEG4 SP / ASP
1920x1080
6~30
30Mbps
H264
1920x1080
6~30
30Mbps
MJPEG
640x480
6~30
10Mbps
*.asf
*.wmv
ASF
DivX 3.11 / 4.x /5.1 / 6.0
1920x1080
6~30
30Mbps
MP3 / AC3 /
LPCM /ADPCM /
WMA / WMA Pro
MPEG4 SP / ASP
1920x1080
6~30
30Mbps
H.264
1920x1080
6~30
30Mbps
*.ts
*.trp
*.tp
*.m2ts
TS
MPEG2
1920x1080
6~30
30Mbps
AC3 / AAC /
MP3 / DD+ /
HE-AAC
H. 264 BP / MP / HP
1920x1080
6~30
30Mbps
*.dat
*.mpg
*.mpeg
*.vob
PS
MPEG1
1920x1080
24/25/30
30Mbps
AC3 / MPEG /
LPCM / AAC
MPEG2
1920x1080
24/25/30
30Mbps
H. 264 BP / MP / HP
1920x1080
6~30
30Mbps
*.3gp
3GPP
MPEG4 SP / ASP
1920x1080
6~30
30Mbps
MP3
H.264
1920x1080
6~30
30Mbps
*.fl v
fl ash
formats
H.264
1920x1080
6~30
30Mbps
MP3
Sorenson H.263
1920x1080
6~30
30Mbps
Other Restrictions
Video content will not play, or not play correctly, if there is an error in the
content or the container.
Sound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the table above.
If the Index Table is in error, the Seek (Jump) function is not supported.
The menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
Video content can not be played, if there are many contents in one fi le.
Video Decoder
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
MPEG4 SP, ASP :
–
Below 1280 x 720
: 60 frame max
–
Above 1280 x 720
: 30 frame max
H.263 is not supported.
GMC is not support.
Audio Decoder
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not
supported)
WMA Lossless is not supported.
■
Music
1.
Press the
◄
or
►
button to select
Music
, then press the
ENTER
E
button in the
Media Play
menu.
2.
Press the
◄/►/▲/▼
buttons to select the desired Music in the fi le list.
3.
Press the
ENTER
E
button or
(Play) button.
✎
During music playback, you can search using the
◄
and
►
button.
✎
(REW) and
(FF) buttons do not function during play.
✎
Only displays the files with MP3 file extension. Other file extensions are
not displayed, even if they are saved on the same USB device.
✎
If the sound is abnormal when playing MP3 files, adjust the
Equalizer
in the
Sound
menu. (An over-modulated MP3 file may cause a sound
problem.)
■
Photos
1.
Press the
◄
or
►
button to select
Photos
, then press the
ENTER
E
button in the
Media Play
menu.
2.
Press the
◄/►/▲/▼
buttons to select the desired photo in the fi le list.
3.
Press the
ENTER
E
button or
(Play) button.
✎
NOTE
While a photo list is displayed, press the
(Play) /
ENTER
E
button
on the remote control to start the slide show.
All files in the file list section will be displayed in the slide show.
During the slide show, files are displayed in order.
During the slide show, you can adjust the slide show speed using (
)
(REW) or (
) (FF) button.
You can move to other file using
◄
or
►
button.
✎
Music files can be automatically played during the Slide Show if the
Background Music
is set to
On
.
✎
The
Mode
in
Background Music
cannot be changed until the BGM
has finished loading.
Supported Photo Formats
Image
Photo
Resolution
JPEG
Base-line
15360 x 8704
Progressive
1024 x 768
■
Other Restrictions
CMYK, YCCK Colour space JPEG are not supported.
■
Playing Multiple Files
Playing selected video/music/photo fi les
1.
Press the Yellow button in the fi le list to select the desired fi le.
2.
Repeat the above operation to select multiple fi les.
✎
NOTE
The
c
mark appears to the left of the selected files.
To cancel a selection, press the Yellow button again.
To deselect all selected files, press the
TOOLS
button and select
Deselect All
.
3.
Press the
TOOLS
button, and then select
Play Selected Contents
.
■
Playing the video/music/photo fi le group
While a fi le list is displayed, move to any fi le in desired group.
■
Copying the fi les to the other USB device
For 4100 / 4105 / 5100 / 5105 models
1.
Press the Yellow button in the fi le list to select the desired fi le.
2.
When you press the green button, the selected fi les copy to the other
USB device.
✎
Available only when both USB devices are connected to the TV.
✎
The FAT32 file system cannot copy the file which size is more than
4GB.
USB
Support File System
Play (Read)
NTFS, FAT, FAT32
Copy & Delete
FAT, FAT32
Format
FAT32 Only
■
Media Play - Additional Functions
Videos/Music/Photos Play Option menus
When playing a fi le, press the
TOOLS
button.
Category
Operation
Videos
Music
Photos
Title
You can move the other fi le directly.
c
Repeat Mode
You can play movie and music fi les
repeatedly.
c
c
Picture Size
You can adjust the picture size to your
preference.
c
Picture Mode
You can adjust the picture setting.
c
c
Sound Mode
You can adjust the sound setting.
c
c
c
Subtitle Setting
You can play the video with Subtitles. This
function only works if the subtitles are the
same fi le name as the video.
c
Audio Format
You can select the digital audio output
format.
c
Audio Language
You can change the audio language if the
video has more than one language.
c
Category
Operation
Videos
Music
Photos
Stop Slide Show
/ Start Slide
Show
You can start or stop a Slide Show.
c
Slide Show
Speed
You can select the slide show speed
during the slide show.
c
Background
Music
You can set and select background music
when watching a Slide Show.
c
Zoom
You can zoom into images in full screen
mode.
c
Rotate
You can rotate images in full screen mode.
c
Information
You can see detailed information about
the played fi le.
c
c
c
■
Settings
Using the Setup Menu
DivX® Video On Demand
: Shows the registration code authorized for
the TV. If you connect to the DivX web site and register with 10-digit
registration code, you can download the VOD activation fi le. Once you
play it using
Media Play
, the registration is completed.
✎
For more information on DivX® VOD, visit http://vod.divx.com.
Device Format
For 4105 / 4105 / 5100 / 5105 models
: Format the Storage Media.
Information
: Select to view information on the connected device.
❑
Using the Sports Mode
Sports Mode
t
This mode provides optimised condition for watching sports games.
✎
When
Sports Mode
is
On
, the picture and sound modes are set to
Stadium
automatically.
✎
If you turn the TV off while watching
Sports Mode
, the
Sports Mode
will be disable.
Support Menu
Self Diagnosis
■
Picture Test
: Use to check for picture problems. If the problem
continues to occur, check the colour pattern.
■
Sound Test
: Use the built-in melody sound to check for sound
problems.
■
Reset
: Reset all settings to the factory defaults.
✎
The PIN input screen appears before the setup screen.
✎
Enter your 4-digit PIN. Change the PIN using the
Change PIN
option.
Software Upgrade
Software Upgrade
can be performed by downloading the latest fi rmware
from “www.samsung.com” to a USB memory device.
HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you
want to upgrade the software. You can fi nd information regarding our call
centres, and how to download products and software.
Other Information
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the TV on
the wall. For detailed information on installing the wall mount, see the
instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product
or injury to yourself or others if you elect to install the TV on your own.
Wall Mount Kit Specifi cations (VESA)
✎
The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the fl oor. When
attaching to other building materials, please contact your nearest dealer.
If you install the TV on a ceiling or slanted wall, it may fall and result in
severe personal injury.
✎
NOTE
•
Standard dimensions for wall mount kits are shown in the table
below.
•
When purchasing our wall mount kit, a detailed installation manual
and all parts necessary for assembly are provided.
•
Do not use screws that do not comply with the VESA standard
screw specifi cations.
•
Do not use screws longer than the standard dimension, as they
may cause damage to the inside of the TV set.
•
For wall mounts that do not comply with the VESA standard screw
specifi cations, the length of the screws may differ depending on
the wall mount specifi cations.
•
Do not fasten the screws too fi rmly. This may damage the product
or cause the product to fall, leading to personal injury. Samsung is
not liable for these kinds of accidents.
•
Samsung is not liable for product damage or personal injury when
a non-VESA or non-specifi ed wall mount is used or the consumer
fails to follow the product installation instructions.
•
Do not mount the TV at more than a 15 degree tilt.
•
Always have two people mount the TV on a wall.
Product
Family
Models
VESA scew hole specs
(A * B) in millimeters
Standard
Screw
Quantity
LED-TV
UA32F4000 / UA32F4001 /
UA32F4100 / UA32F4020 /
UA32F4105 / UA32F5000 /
UA32F5100 / UA32F5105 /
UA40F5000 / UA40F5020 /
UA40F5100 / UA40F5105
200 X 200
M8
4
UA46F5000 / UA46F5100 /
UA50F5000
400 X 400
Do not install your Wall Mount
Kit while your TV is turned on.
It may result in personal injury
due to electric shock.
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause
the TV to fall. In particular, ensure that your children do not hang
over or destabilize the TV; doing so may cause the TV to tip over,
resulting in serious injuries or death. Follow all safety precautions
provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To prevent the TV from falling
✎
Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
1.
Put the screws into the clamps and fi rmly fasten them onto the wall.
Confi rm that the screws have been fi rmly installed onto the wall.
✎
You may need additional material such as an anchor depending on
the type of wall.
✎
Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
2.
Remove the screws from the back Centre of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
✎
Screws may not be supplied with the product. In this case, please
purchase the screws of the following specifications.
3.
Connect the clamps fi xed onto the TV and the clamps fi xed onto the
wall with a strong cable and then tie the string tightly.
✎
Note
Install the TV near to the wall so that it does not fall backwards.
It is safe to connect the string so that the clamps fixed on the wall
are equal to or lower than the clamps fixed on the TV.
Untie the string before moving the TV.
4.
Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
installer.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used
to physically fi x the system when using it in a public place. Refer to the
manual provided with the Kensington Lock for additional information on
proper use.
✎
Please find a “
K
” icon on the rear of the TV. The Kensington slot is
beside the “
K
” icon.
✎
The position and colour may differ depending on the model.
To lock the product, follow these steps:
1.
Wrap the Kensington lock cable around a large, stationary object
such as desk or chair.
2.
Slide the end of the cable with the lock attached through the looped
end of the Kensington lock cable.
3.
Insert the locking device into the Kensington slot on the product.
4.
Lock the lock.
✎
These are general instructions. For exact instructions, see the User
manual supplied with the locking device.
✎
The locking device has to be purchased separately.
✎
The location of the Kensington slot may be different depending on
the TV model.
Caution of the cover-jack
Caution
Caution: The cover-jack is for use by qualifi ed service personnel
only. To reduce the risk of electric shock or fi re hazard, do not
use the cover jack, unless you are qualifi ed to do so.
TV Rear Panel
Cover-jack
✎
The rear panel may differ depending on the model.
Troubleshooting
If you have any questions about the TV, fi rst refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click
on Support, or contact the call centre listed on the back-cover of this manual.
Problem
Possible Solution
Picture Quality
The TV image does not look as good as it
did in the store.
If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD
(high defi nition) picture quality.
Cable/Satellite subscribers: Try HD stations from the channel line up.
Antenna connection: Try HD stations after performing Auto tuning.
✎
Many HD channels are up scaled from SD(Standard Definition) contents.
Adjust the Cable/Set top box video output resolution to 1080i or 720p.
Make sure you are watching the TV at the minimum recommended distance based on the size and defi nition of the signal.
The picture is distorted: macroblock error,
small block, dots, pixelization
Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action
movies.
Low signal level or bad quality can cause picture distortion. This is not a TV issue.
Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
Colour is wrong or missing.
If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or
loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
Adjust the
Picture
options in the TV menu. (go to
Picture mode / Colour / Brightness / Sharpness
)
Adjust
Energy Saving
option in the TV menu. (go to
MENU
-
Setup
-
Eco Solution
-
Energy Saving
)
Try resetting the picture to view the default picture settings. (go to
MENU
- Picture - Picture Reset
)
There is a dotted line on the edge of the
screen.
If the picture size is set to
Screen Fit
, change it to
16:9
.
Change cable/satellite box resolution.
The picture is black and white.
If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box
reboots. It may take up to 20 minutes.
Set the output resolution of the cable box to 1080i or 720p.
Sound Quality
There is no sound or the sound is too low at
maximum volume.
Please check the volume the of external device connected to your TV.
The picture is good but there is no sound.
Set the
Speaker Select
option to
TV Speaker
in the sound menu.
If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.
If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s
audio option to HDMI when you have a HDMI connected to your TV).
If you are using a HDMI cable, a separate audio cable is required.
If your TV has a headphone jack, make sure there is nothing plugged into it.
The speakers are making an inappropriate
noise.
Check the cable connections. Make sure a video cable is not connected to an audio input.
For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.
No Picture, No Video
The TV will not turn on.
Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
Make sure the wall outlet is working.
Try pressing the
POWER
button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The
remote control does not work” below.
The TV turns off automatically.
Ensure the
Sleep Timer
is set to
Off
in the
Time
menu.
If your PC is connected to the TV, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.
There is no picture/video.
Check cable connections (remove and reconnect all cables connected to the TV and external devices).
Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.
For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
Make sure your connected devices are powered on.
Be sure to select the TV’s correct source by pressing the
SOURCE
button on the TV remote.
Problem
Possible Solution
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
Make sure the Antenna cable is connected securely.
Please try
Setup
(Initial setup) to add available channels to the channel list. Go to
MENU
- System - Setup
(Initial setup) and
wait for all available channels to be stored.
Verify the Antenna is positioned correctly.
The picture is distorted: macroblock error,
small block, dots, pixelization
Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action
movies.
A low signal can cause picture distortion. This is not a TV issue.
PC Connection
A “
Mode Not Supported
” message
appears.
Set your PC’s output resolution so it matches the resolutions supported by the TV.
The video is OK but there is no audio.
If you are using a HDMI connection, check the audio output setting on your PC.
Others
The picture will not display in full screen.
HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
Adjust the picture size options on your external device or TV to full screen.
The remote control does not work.
Replace the remote control batteries with the poles (+/–) in the right direction.
Clean the transmission window located on the top of the remote control.
Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the
SAMSUNG TV code.
A “
Mode Not Supported
” message
appears.
Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to resolution
settings in this manual.
There is a plastic smell from the TV.
This smell is normal and will dissipate over time.
TV is tilted to the right or left side.
Remove the stand base from the TV and reassemble it.
There are diffi culties assembling the stand
base.
Make sure the TV is placed on a fl at surface. It is necessary to use magnetized screw driver if you cannot remove the screws
from the TV.
The
Broadcasting
menu is grey out
(unavailable).
The
Broadcasting
menu is only available when the TV source is selected.
Your settings are lost after 30 minutes or
every time the TV is turned off.
If the TV is in the
Store Demo
mode, it will reset audio and picture settings every 30 minutes. If you want to change the settings
from
Store Demo
mode to
Home Use
, press the
SOURCE
button to select TV mode, and go to
MENU
→
Support
→
Use
Mode
.
You have intermittent loss of audio or video.
Check the cable connections and reconnect them.
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are fl exible enough for long
term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
You see small particles when you look
closely at the edge of the frame of the TV.
This is part of the product’s design and is not a defect.
There are recurrent picture/sound issues.
Check and change the signal/source.
A reaction may occur between the rubber
cushion pads on the base stand and the
top fi nish of some furniture.
To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
✎
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or
dark pixels on the screen. These pixels will have no impact on the performance of the product.
✎
You can keep your TV as optimum condition upgrading the latest firmware on web site (www.samsung.com
→
Support) by USB.
Storage and Maintenance
✎
If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
Do not spray water directly onto the product. Any liquid that goes into the
product may cause a failure, fi re, or electric shock.
Clean the product with a soft cloth dampened with in a small amount of water.
Do not use a fl ammable liquid (e.g. benzene, thinners) or a cleaning agent.
License
DivX Certifi ed® to play DivX® video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an offi cial DivX Certifi ed® device that plays DivX video. Visit
divx. com for more information and software tools to convert your fi les into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certifi ed® device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com
for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX
Certifi ed® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567,
7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS
Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976,
7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are
registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
Open Source License Notice
In the case of using open source software, Open Source Licenses are available on the product menu. Open Source License Notice is written only English.
Specifi cations
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Model Name
UA32F4000 / UA32F4001 / UA32F4100 / UA32F4105
UA32F4020
Display Resolution
1366 x 768
Screen Size
81 cm
Sound
Output
10W x 2
Dimensions (W x H x D)
Body
With Stand (Square)*
With stand (Round)*
73.7 X 44.0 X 4.9 (cm)
73.7 X 50.9 X 19.1 (cm)
73.7 X 48.7 X 25.2 (cm)
73.7 X 44.0 X 4.9 (cm)
-
73.7 X 48.7 X 25.2 (cm)
Weight
Without Stand
With Stand (Square)*
With stand (Round)*
5.2 kg
5.7 kg
5.6 kg
5.2 kg
-
5.6 kg
Model Name
UA32F5000 / UA32F5100 /
UA32F5105
UA40F5000 / UA40F5020 /
UA40F5100 / UA40F5105
UA46F5000 / UA46F5100
UA50F5000
Display Resolution
1920 x 1080
Screen Size
81 cm
102 cm
117 cm
126 cm
Sound
Output
10W x 2
Dimensions (W x H x D)
Body
With stand
73.8 X 44.5 X 4.9 (cm)
73.8 X 50.5 X 19.1 (cm)
92.8 X 55.2 X 4.9 (cm)
92.8 X 61.2 X 23.5 (cm)
105.9 X 62.6 X 4.9(cm)
105.9 X 68.6 X 23.5 (cm)
113.5 X 66.8 X 4.9 (cm)
113.5 X 72.7 X 23.5 (cm)
Weight
Without Stand
With Stand
5.0 kg
5.6 kg
8.0 kg
9.5 kg
10.8 kg
12.3 kg
13.0 kg
14.5 kg
✎
Design and specifications are subject to change without prior notice.
✎
For information about the power required and more about power consumption, refer to the label attached to the product.
✎
* The option may differ depending on country.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fi re or a problem with the product due to an increase in the internal temperature of the product.
✎
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎
The appearance may differ depending on the product.
✎
Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
- 10 -
- 9 -
- 14-
- 13 -
- 11 -
- 15 -
- 12 -
- 16 -
[UF4000-UF5000-AR]BN68-04908L-01ENG.indd 2
2013-08-27 9:35:30
