![background image](http://html.mh-extra.com/html/samsung/tint-sch-r420-series/tint-sch-r420-series_user-manual_1189580095.webp)
Voice SVC
92
Voice Settings
Note:
After you adapt Digit Dial, your phone is customized to your voice, and your voice only. Others will not
be able to use it unless they reset the phone to factory defaults.
Adaptation involves recording several sequences of four digits each. The recording
process takes about a minute.
Tips for Adapting Digit Dialing
•
Use Adapt Digits in a quiet place.
•
Make sure you wait for the beep before starting to speak.
•
Speak clearly, and say each digit distinctly.
•
If you make a mistake while recording a sequence of digits, or if there is an
unexpected noise that spoils the recording, re-record that sequence.
•
Only adapt digits if you are regularly having problems with digit dialing. Once you
adapt, digit dialing will not work as well for other people using your phone. (You
can always reset digit adaptation to its original state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1.
In standby mode, press the
MENU
(left) soft key (
), then press
(for
Voice SVC
),
(for
Voice Settings
), and
for
Digit Dialing
. The following options appear in the display:
• Adapt Digits
• Reset Digits
2.
Use the Up/Down navigation keys to highlight
Adapt Digits
, then press the
key
. Your phone displays text describing the Adapt Digits process.
3.
Press the
key.
Your phone displays the first digit sequence and
“
Please say
” plays through the speaker followed by the four digits
appearing in the display.
4.
Wait for the beep and say the digits using your normal tone of voice. After
a moment, the phone plays back the recording and prompts “
Did the
recording sound ok?
”
•
If the recording was good, say “
Yes
.”
•
If you need to re-record, say “
No
.”
If you say “
No
,” the phone prompts you to pronounce the digits again. Wait
for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
OK
OK