English - 16
The remote control does not work.
•
Check if the Remote control sensor at the front right of the Projector blinks when you press the remote's Power
button. If it does not, replace the remote control's batteries.
•
Make sure that the batteries are installed with their poles (+/–) in the correct direction.
•
Try pointing the remote directly at the Projector from
1.5-1.8
m away.
•
If your Projector came with a Samsung Smart Remote (Bluetooth Remote), make sure to pair the remote to the
Projector.
Changing the Projector’s password
>
Settings
>
General
>
System Manager
>
Change PIN
1.
Run
Change PIN
and then enter the current password in the password field. The default password is “0000”
(France: “1111”).
2.
Enter a new password and then enter it again to confirm it. The password change is complete.
• If you forgot your PIN code, press the buttons in the following sequence to reset the PIN to “0000” (France: “1111”):
On the Samsung Smart Remote: Select
(Volume) button. >
Volume Up
>
>
Volume Down
>
>
Volume
Up
>
.
