Preventing the TV from falling
1.
Using the appropriate screws, firmly fasten a set of brackets to
the wall. Confirm that the screws are firmly attached to the wall.
– You may need additional material such as wall anchors
depending on the type of wall.
2.
Using the appropriately sized screws, firmly fasten a set of
brackets to the TV.
– For the screw specifications, refer to "Standard Screw"
in the table on the previous page.
3.
Connect the brackets fixed to the TV and the brackets
fixed to the wall with a durable, heavy-duty string, and
then tie the string tightly.
– Install the TV near the wall so that it does not fall backwards.
– Connect the string so that the brackets fixed to the wall are at
the same height as or lower than the brackets fixed to the TV.
•
The product colour
and shape may vary
depending on the model.
Using the Cover Cap
When you do not use the VESA wall mount, you can cover the
wall mount screw holes with cover caps. See the image below.
<43-49 inches>
<55-65 inches>
Precautions when installing the TV with a stand
When you install the TV with a stand,
avoid placing the stand on the back
part of the table surface. Failure to do
so may cause the motion sensor at the
bottom of the TV not to work properly.
English - 16
