Samsung TC29J6MNX/XAX Service Manual Download Page 3

Page: 3 / 67

4-2 Factory (“Service”) Mode

Alignment and Adjustments (Electrical)

Samsung Electronics

4-1

4. Alignment and Adjustments (Electrical)

4-1 Preadjustment

4-1-1 Factory Mode

1. Do not attempt these adjustments in the Video

Mode.

2. The Factory Mode adjustments are necessary

when either the EEPROM (IC901) or the CRT
is replaced.

3. Do not tamper with the “Adjustment” screen

of the Factory Mode menu. This screen is
intended only for factory use.

4-1-2 When EEPROM (IC901) Is Replaced

1. When IC901 is replaced all adjustment data

revert to initial values. It is necessary to re-
program this data.

2. After IC901 is replaced, warm up the TV for

10 seconds.

4-1-3 When CRT Is Replaced

Make the following adjustments after setting up

purity and convergence:

White Balance
Sub-Brightness
Vertical Center
Vertical Size
Horizontal Size

4-2-1 Procedure for the “Adjustment” Mode

1. This mode uses the standard remote control.

The Service Mode is activated by: (1) pressing
the “FACTORY” service key on the local-key-
board, or (2) by entering the following remote-
control sequence (within 2 seconds):

STAND-BY

→

MUTE

→

POWER ON

2. The “SERVICE (FACTORY)” message will be

displayed. The Service Mode has three compo-
nents: Adjustment, Option Bytes and Reset.

3. Access the Adjustment Mode by pressing the

“SELECT” keys ( ). The adjustment para-
meters are listed in the accompanying table,
and selected by pressing the “SELECT” keys
(

4. Selection sequences for the NTSC systems:

down or up key:

CAP>SBT>SCT>SCR>STT>BLR>BLG>RG>
GG>BG>PWL>SC>VSL>VA>NVS>NHS>
EW1>EWP>EWUC>EWLC>VSC>HP>HB>
TC>EW2>CDL>BKS>NDL>WS>VM>AKB>
CB>BPS>SCL>SVM>SCBT

5. The “SELECT” keys (

) increase or decrease

the adjustment values, (stored in the
non-volatile memory) when Adjustment Mode
is cancelled.

Summary of Contents for TC29J6MNX/XAX




































































Search results

Summary of Contents for TC29J6MNX/XAX

Reviews:

Related manuals for TC29J6MNX/XAX

Brands by name

Popular brands

Samsung TC29J6MNX/XAX, Service Manual

Search results

Summary of Contents for TC29J6MNX/XAX

Reviews:

Related manuals for TC29J6MNX/XAX

Brands by name

Popular brands