manualshive.com logo in svg

Samsung TC222T, User Manual, Page: 42 / 91

Share
Download
Samsung TC222T User Manual Download Page 42

42

Using "Windows 10 Enterprise LTSB"

2

2 Using "Windows 10 Enterprise LTSB"

Using the Standalone restore solution

Restore the system using a restore image saved on the product.

1

After the power is connected, press the 

Home

 key immediately after the system starts during 

boot to enter the boot menu.

2

Select the 

Recovery Mode

 menu and press the 

P

 key to enter "

admin

" which is the password.

3

Run the 

Recovery Mode

 menu by pressing the 

Enter

 key.

4

If the 

PROMPT

 "

root@xxxxx:/#

" appears, enter "

recovery

" to restore the system.

5

If 

PROMPT

 appears after a message informing that the system is successfully restored, run the 

reboot

 command to restart the system.

Disk is configured as follows. Deleting or changing partitions may disable booting or the 

Standalone

 

restore solution.

 

“

Your PC into problem

” message appears after restarting the system. But please ignore the 

message and restoring will be finished normally after disk checking.

Data saved by the user and customized settings are deleted after a system restore.

 

BOOT_AGENT

Windows 10 Enterprise 

LTSB 

BACKUP

Drive Letter is not defined

C:

Drive Letter is not defined

Summary of Contents for TC222T




























































































Reviews:

No comments