manualshive.com logo in svg

Samsung T200HD - SyncMaster - 20" LCD Monitor, User Manual

Share
Download
Samsung T200HD - SyncMaster - 20

 

Audio Type

Dual 1 / 2

Dual 1 / 2

Stereo

STEREO 

 MONO Automatic change

Dual

DUAL 1 

 DUAL 2

DUAL 1

NICAM Stereo

Mono

MONO

Automatic change

Stereo

MONO 

 STEREO Automatic change

Dual

MONO 

 DUAL 1

 DUAL 2 

DUAL 1

 Note

If the stereo signal is weak and an automatic switching occurs, then switch to the mono.

This function is only activated in stereo sound signal. It is deactivated in mono sound signal.

This function is only available in TV mode.

Channel

 Note

The default setting may be different depending on the selected Input Mode (input signal

source selected in External Input List) and the selected resolution.

Country

Select the country in which the product is being used before you use the Auto Store feature.

If you do not see your country in the list, select Others.

Analogue Channel

You can change the country for analogue channels.

Digital Channel

You can change the country for digital channels.

 Note

The PIN number input screen appears. Enter your 4 digit PIN number.

Adjusting the LCD Display

Summary of Contents for T200HD - SyncMaster - 20" LCD Monitor






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands