Using the Product
3-5
Audio Description
This is an auxiliary audio function that provides an additional audio track for visually challenged per-
sons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along
with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control
the volume.
•
<Audio Description>
Turn the audio description function on or off.
•
<Volume>
You can adjust the audio description volume.
•
Volume is active when Audio Description is set to On.
While viewing a Digital channel, this function can be selected.
Auto Volume
Reduces the differences in volume level among channels.
•
<Off> - <Normal> - <Night>
Speaker Select
If you want to hear the sound through separate speakers, cancel the internal amplifier.
•
<External Speaker> - <TV Speaker>
•
If you select <External Speaker> in the <Speaker Select> menu, the sound settings will be
limited.
•
The volume and [MUTE] buttons do not operate when the <Speaker Select> is set to
<External Speaker>. Please set the volume on your Home theatre.
Additional Setting
Digital channels only
•
DTV Audio Level
This function allows you to reduce the disparity of a voice signal (which is one of the signals
received during a digital TV broadcast) to a desired level.
•
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -
10dB and 0dB.
•
To increase or decrease the volume, adjust between the range 0 and -10 respectively.
•
SPDIF Output
SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference
going to speakers and various digital devices such as a DVD player.
•
Audio Format
During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF)
format from the options PCM or Dolby Digital.
•
Audio Delay
Correct audio-video sync problems, when watching TV or video, and when listening to digital
audio output using an external device such as an AV receiver (0ms ~ 250ms).
•
Dolby Digital Comp
This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e.
MPEG Audio, HE-AAC, ATV Sound).
Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft
sounds at night time.
•
Line
Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.
•
RF
Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.
Sound Reset
You can restore the Sound settings to the factory defaults.
•
<OK> - <Cancel>
MENU
DESCRIPTION
