•
Ethernet Mode
The
Ethernet Mode
field configures the Ethernet mode of the Portal. The options are:
Auto
10 Mbps Full-Duplex
100 Mbps Full-Duplex
Connection Management
The
Connection Management
tab allows enabling or disabling connection management, and to spec-
ify the IP address of the connection manager. In a managed connection, an external
Connection
Managerment
Server communicates with and can remotely control and configure the device. Addi-
tionally, the connection manager can locate an appropriate peer for the device to connect to, and initiate
the connection.
Connection management
can greatly simplify the administration effort for a large,
complex system.
•
Enable Connection Management
If the
Enable Connection Management
option is enabled, the device can be configured and con-
trolled by an external connection manager.
•
Identify Connection Manager By
The
Identify Connection Manager By
selector allows the administrator to choose whether the
connection manager is identified by
IP address
, or by Fully Qualified Domain Name (FQDN). If
connection management is disabled, this field is not required and is not editable.
•
Enable Event Log Notification
The
Enable Event Log Notification
field enables event notification from the PC-over-IP Host
and Portal devices to the connection management server.
•
Enable Diagnostic Log
The
Enable Diagnostic Log
field allows enabling diagnostic event log messages to log normal
Connection Management Interface (CMI) server and client operation.
Using the Software
