manualshive.com logo in svg

Samsung SyncMaster 400BX, User Manual, Page: 32 / 171

Share
Download
Samsung SyncMaster 400BX User Manual Download Page 32

32

Preparations

1

1 Preparations

1.4

VESA Bracket (hanger) Installation

1.4.1

VESA Bracket (hanger) Installation 

 

z

The VESA bracket must be installed in accordance with the VESA standards. 

z

Purchasing and installing a VESA bracket: Contact your nearest Samsung dealer to order a VESA 

bracket. After an order has been placed, a technician will visit you to install your VESA bracket. 

z

Samsung is not held responsible for any damage to the product or injuries sustained as a result of 

the product being installed by an unqualified individual. 

 

Installation Measurements

 

Be sure to use machine screws with a diameter of 6 mm and a length of 8 mm to 12 mm to install the 

bracket on a wall.

 

Installing a Bracket 

z

The bracket must be installed by a qualified technician. 

z

Samsung is not held responsible for any damage to the product or injuries sustained as a result of 

the product being installed by an unqualified individual. 

z

The bracket must be installed in a cement wall. Installation in a plaster or wooden wall is unstable 

and the product may fall off. 

400.0

400.0

Summary of Contents for SyncMaster 400BX












































































































































































Reviews:

No comments