manualshive.com logo in svg

Samsung SyncMaster 323T, User Manual

Share
Download
Samsung SyncMaster 323T User Manual Download Page 73

 
This monitor complies with SWEDAC(MPR II) recommendations for reduced electric and magnetic fields. 

 

European Notice (Europe only) 

 
Products with the CE marking comply with the EMC Directive(89/336/EEC), (92/31/EEC), (93/68/EEC) and 
the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. 
Compliance with these directives implies conformity to the following European Norms:  

z

EN55022:1998+A1:2000 - Radio Frequency Interference  

z

EN55024:1998 - Electromagnetic Immunity of Information Technology Equipment  

z

EN61000-3-2:1995+A1/A2:1998 - Power Line Harmonics  

z

EN61000-3-3:1995 - Voltage Fluctuations 

 

PCT Notice

 

 

 

VCCI

 
This is a Class B product based on the standard of the Voluntary Control Council for Interference by 
Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic 

environment, it may cause radio interference. Install and use the equipment according to the instruction 
manual. 

MPR II Compliance

 

Regulatory

 

Mercury Statement (LCD Monitor, LCD TV, DLP Projection TV, Projector for USA only)

 LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR  

DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS  
For details see lamprecycle.org, eiae.org, or call 1-800-Samsung 

Summary of Contents for SyncMaster 323T















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands