ADDITIONAL RINSE
4
Set the WATER SELECTOR KNOB to
SPIN and CYCLE
SELECTOR KNOB to
‘DRAIN’.
RINSING
OVER FLOW RINSE
1. Set the CYCLE SELECTOR KNOB to
‘
WASH RINSE
’.
(In case drain pump
“
WASH
”
)
2. Supply the proper amount of water
as not to overflow the top of the
washing tub.
3. Set the WASH TIMER
2~3minutes.
3.As soon as the WASH TIMER
shuts off, turn off the water tap.
1.Keep suppling water
4. Drain the water.
Set the CYCLE
SELECTOR
KNOB to
‘
DRAIN
’
5.Repeat this cycle until drain water
is clean. (2~3 cycles)
2.Set the WASH
TIMER 6~8minutes.
4. Set the CYCLE
SELECTOR KNOB
to
‘
DRAIN
’.
1
2
3
4
5
6
inner lid
safety cover
After rinsing you can select this
course for more effective rinse
(Don't select only this course
for rinse.) Load the laundry
evenly into the spin basket.
Supply water for about 1minute.
Adjust the water flow to prevent
overflow from the wash tub.
After stopping water
supply, cover the
laundry with safety cover
and close the inner lid.
Close the spin dryer
lid.
Set the SPIN DRY
TIMER 2~3 minutes.
(Without pump)
(With pump)
Adjust water pressure to ensure
that the amount of water supplied
does not exceed that water drained.
