background image

14-4

Q6. What is the child lock?
 

Child-Lock function     

      This is a device to protect children from being accidentally hurt while playing with the washer.
 

  - How to start the Child-Lock function:    

 

  - Press the “Power” button to go to an initial washing mode.    

 

  - By pressing “Start/Hold” button, you start washing and in case Child Lock function is needed  

           during the laundry   
 

  - Press both the “Water level” and “Function” buttons at the same times.      

 

  (Note: You cannot perform the function without the “Power” button on.)

       - In the event that you would like to modify the Child-Lock function, “L” signal flashes in the “signal   
           window showing the rest of the set time” every two seconds, which means it is locked and 
           indicates how much time is left until the function is released.
 

  - To release the function of Child-Lock:   

 

  - In case the “Child-Lock” is programmed, press both the “Function” and “Water level” buttons at the  

           same time.

 Q7. Is spinning duration selectable?
        Spinning duration is set in minutes. From one to seven minutes, customers are free to select the 
 

  duration most suited for the washing according to type and weight.

 

 Q8. What is the limit for setting delay start time for the “Delay Start” duration?
      Delay start time is set in hours. The choice is in the range of 3 to 18 hours.

 Q9. Is there an inlet for bleaching agent and rinsing agent?
        Yes.

     - The Softener Dispenser releases the fabric softener at the appropriate time when 

         the last rinsing proceeds.

 

Q10. What kind of filter is used in this product?
         This product uses the Magic filter.
 

- This unique magic Filter ensures that all the lint inside the tub is captured for top quality filtering    

         results to deliver consistently effective cleaning results.

 

Summary of Contents for SW82ASP


































































Reviews: