background image

2_

Features

Safety instructions

_3

safety instructions

Please note that the following precautions for safety intend to prevent unpredictable danger and damage by 
helping the proper use in safety.
When using hot water in washing, please make sure that the water should not exceed 50°C.

  

Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.

WARNING

There might be serious injury or fatal accident when you violate this instruction.

 

If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its 
service agent or a similarly qualified person in order to avoid a hazard.

 

Do not pull the cord off or touch it with moist hands.
−  An electric shock or a fire may take place.

 

Do not bend the power supply cord by force or press it with heavy things.
−  An electric shock or a fire may take place.

 

Do not install the washer nearby electric implement or don’t put a candle light or cigarette 
light on the washer.
−  A fire may take place.

 

During operation, do not put your hands or metal materials under the washer.
−  You may be hurt by spinning board beneath the washer.

 

Stay away from the washer when the bottom of the washer sinks into the water.
−  There might be an electric shock. Please wait until the water drains out completely.

 

Do not put laundry stained with gasoline, benzene, or alcohol in the washer, and keep the 
materials away from the washer.
−  An explosion or a fire may take place.

 

During spinning, don’t put your hand in the spinning tub.
−  It may hurt your hands. If it does not stop within 15 seconds after you open the lid, call 

service agent immediately.

 

This appliance has to be connected to the plug endurable to proper power consumption.

 

This appliance has to be positioned so that the plug is accessible after installation.

 

No user-serviceable parts inside. Refer any servicing to qualified service personnel.
−  Otherwise this may cause a mechanical error, electric shock, fire or physical damage.
−  The product warranty does not cover problems resulting from disassembling the product.

 

Do not use this product for business purposes.

 

For washing machines with ventilation openings in the base, that a carpet must not obstruct 
the openings.

SW75USPIW-02459M_EN(ÀÓ½Ã).indd   3

2009-05-28   ¿ÀÈÄ 4:34:23

Summary of Contents for SW75USP

























Reviews: