6-3 Spin - Nut Repairing Box
6-3-1 Procedure
1. Insert the jig
➂
into the spin-nut
②
.
2. Insert the guide pin
➃
into the groove of the flange -
shaft by rotating it to the right and left.
3. Insert the connecting rod
⑤
and handle
➅
into the
square box. Then turn the handle clockwise on the
axis of the small box to disassemble (Right-hand
thread).*
*To disassemble the box, give three to four times of
instantaneous shocks to the handle in the
loosening direction, then disassemble it by turning
the handle when the nut is loosened.
4. To disassemble the box, strike the handle three or
four times-quick shocks to loosen it-then complete
the disassembly by turning the handle as the nut is
loosened.
5. Reassemble in reverse order.
6-4
WASHING MACHINE
6. Disassembly and Reassembly
1 SHAFT
2 SPIN NUT
3 JIG
5 CONNECTING ROD
4 GUIDE
PIN
6 HANDLE
Guide Pin
Inserting Point
FLANGE
SHAFT
SPIN
BASKET
LOCK
LOOSEN
Summary of Contents for SW70X1
Page 12: ...5 2 PCB and Pattern Diagram 4 8 WASHING MACHINE 5 Schematic and Wiring Diagrams ...
Page 13: ...5 Schematic and Wiring Diagrams SAMSUNG ELECTRONICS CO LTD 5 1 5 1 Wiring Diagram ...
Page 29: ...1 5 6 19 2 14 16 17 18 20 15 7 11 9 12 13 21 10 8 3 4 8 Exploded Views 8 1 WASHING MACHINE ...
Page 33: ...8 5 WASHING MACHINE 1 5 6 19 1 3 4 7 11 12 14 16 15 13 17 17 20 18 8 9 2 10 ...
