Samsung SVR-960 Page 30 User Manual Download

Page: 30 / 90

User Manual

Chapter 5. Playback

5.1

Various Playback mode

5.1.1 Basic Screen Playback (9 division screen)

Press [PLAY] button from monitoring mode or click Play button

from Function menu

using mouse.

If it press [PLAY, >] button and [FWD] button for changing speed, it playback image

forwarding in 1x speed set first.

If it presses [REW] to change speed, it plays rewinding in a speed set first.

When doing playback by 9 chs, possible playback Frame per second is 2 fps

(displays only I Frame). Therefore, total Frame per second for 9 chs to playback

is 18 fps and for 1 ch, 30 fps as many as its max recording performance

Press Playback button from Monitor division mode to play back recording image

in 9 divisions.

5.1.2 Various Playback functions

PLAY

: Playback in 1 speed. When using mouse, click Play button

from

Function menu.

It playback multi image always through pressing [PLAY] button from

monitor mode. Also, when Playback by pressing [PLAY] button, it

playback recording image from the time user played recently.

PAUSE

: It pause Playback. When using mouse, press Pause button

from

Function button.

STOP

: Stop Playback. When using mouse, press Stop button

from

Function button.

FWD

: Whenever pressing button, playback speed is changed. (x2, x4, x8,

x16, x32, x64, x2, x4 sequentially). At Live, press [FWD] button to Play

recorded images in a minute ago from present live time. It changes

Play speed Function through

button.

REW

: It changes Playback speed in reverse whenever pressing a button.

(x2, x4, x8, x16, x32, x64, x2, x4 sequentially)

Summary of Contents for SVR-960



























































































Search results

Summary of Contents for SVR-960

Reviews:

Related manuals for SVR-960

Brands by name

Popular brands

Samsung SVR-960, User Manual

Search results

Summary of Contents for SVR-960

Reviews:

Related manuals for SVR-960

Brands by name

Popular brands