39
MAINTENANCE
If the picture is not clear on the screen, use a cleaning tape.
If the cleaning tape is played back for a long time, it may be harmful to the head.
1
Insert the cleaning tape
2
Into your VCR and press
the PLAY button.
3
After about 15 seconds,
press the STOP button to
stop the operation.
• Use the cleaning tape one more
time when there is no normal
picture.
STOP/EJECT
Change the head under the
following conditions
• The picture is not clear on the screen as the head is
worn due to use of the video for an extended period of
time.
• The head can be worn when using damaged or
defective tapes or using the cleaning tape several times.
• The service life of the head varies depending upon the
environmental conditions for use (temperature, humidity,
dust, etc.). Replace the head when using your unit for
more then 3,000 hours.
When the screen does not show a
good picture
1. First press the TRACKING button.
2. Check to see whether the video output is properly
connected.
3. Insert the cleaning tape. When the screen image is not
improved even after repeating the above procedures,
contact your dealer or service center.
CLEANING LIQUID
CLEANING TAPE
POW
ER
PLAY
REC
P/STILL
REC CH
ECK
STOP/E
JECT
MENU
V-LO
CK
TRAC
KING
/SET
TIME
MOD
E
REC
LOCK
REV
AUDIO O
N CO
UNT
CNT.M
EMO
CLEAR
RESET
HIGH PIC
TURE
REC LOC
K
HIGH
PICTU
RE
SHIF
T
RE
W
F.F
CLE
ANIN
G TA
PE
STOP/EJECT
00707A SVR-1280/Eng3 2005.5.18 1:31 PM Page 40
