Name and Function of Each Part
COLOR DOME CAMERA
User’s Manual
11
COLOR DOME CAMERA
User’s Manual
10
Pan Base :
You can rotate it from -170˚ to +170˚.
Tilt Base :
You can adjust up and down the camera from 20˚ to 90˚.
Pan Base Holding Screws
(Color : Silver)
Tilt Base Holding Screws
Focus Handle :
Used to provide for accurate focusing of an object within the lens field of view.
Zoom Handle :
Used to adjust zoom magnification by turning.
Function Selection Switch
(*refer to p11)
V. PHASE Adjustment V.R :
If the camera is to be used in the LL mode with AC 24V power supply, the
vertical phase may require adjustment to synchronize the
vertical phase of the camera with other camera in the
system. Make this adjustment when the vertical
phase of the camera does not match with other
cameras or systems. For correct adjustment,
use a multi - channel oscilloscope. The V.
PHASE adjustment can be readjusted.
DC Level Adjustment V.R :
Used to adjust video output level of DC driven
auto iris lens. When the brightness control of the
monitor does not operate correctly, you can get the
optimum picture by controlling the DC level of camera.
Video Output Connector for Installer :
Used to connect it with external viewer as follows.
Video Output Jack
Power Input Jack
Shield Case
Dome Cover
External Viewer (not supplied)
Video Output Cable for Installer
*Function Selection Switch
• Default setting is subject to change without notice.
Notes
(1) BLC(Backlight Compensation) ON/OFF Switch
This switch improves an image that is darkened because of backlight. When the
lighting source is in the rear of an object, the object might be seen somewhat dark.
If you want to see the object clearly, turn this switch ON. The effective area
where backlight compensation is activate is fixed in the center of the screen.
