Samsung SV-L620K Instruction Manual Download Page 24

45

44

Problems and Solutions

Before contacting the Samsung after-sales service, perform the following simple checks.

Problem

Explanation/Solution

No power

Check that the power plug is connected to a wall outlet.

Have you pressed the VCR STANDBY/ON (STANDBY/ON) 
button?

You cannot insert a video cassette

A video cassette can only be inserted with the window 
side up and the safety tab facing you.

The television programme was not recorded

Check the VCR aerial connections.

Is the VCR tuner properly set?

Check if the safety tab is intact on the cassette.

Timer recording was unsuccessful

Was the VCR STANDBY/ON (STANDBY/ON)  button pressed 
to activate the timer?

Re-check the recording start/stop time settings.

If there was a power failure or interruption during timer 
recording, the recording will have been cancelled.

No playback picture or the picture 

Check to see if you are using a prerecorded tape. 

is distorted

You cannot see normal broadcasts

Check the TUNER/EXTERNAL setting. It should be on 
TUNER.

Check the TV/VCR aerial connections.

Noise bars or streaks on playback

Press the PROG/TRK (

œ

or 

) / TRK (

or

) buttons to 

minimize this effect.

When the 

ll button is pressed

A still picture may have “noise bars”, depending on the 

during playback, the still picture

condition of the tape. Press the PROG/TRK (

œ

or 

) /

TRK (

or

) buttons has severe “noise bars” streaks

during SLOW motion to minimize this effect.

Video Head Cleaning 

If poor pictures appear on a variety of cassettes, the video 
heads may need cleaning. This is not a common problem 
and unless it appears, the heads should not be cleaned. 
When cleaning the video heads, read all instructions 
provided with the head cleaning cassette. Incorrect head 
cleaning can permanently damage the video heads.

If when tuning in your TV to the VCR test  

1. Remove the aerial input plug from the socket marked (aerial  

pattern your TV does not find the test pattern 

symbol) on the rear of the VCR. 

or the pattern when found suffers from 

2. Carry out the instructions “Tuning Your Television for the VCR”

interference, it may be due to the VCR output

(see page 15).

channel clashing with the normal TV 

3. Carry out the instructions “Setting the VCR output Channel” 

transmissions in your area. To prevent this 

(see page 18), move the channel number several channels 

you will need to change the VCR output 

down from the original setting. (example: from 36 to 33). 

channel in the following way 

4. Replace the aerial plug into the socket marked (aerial symbol) 

on the rear of the VCR. 

5. Re-tune your TV to the VCR again by following instructions 

“Tuning Your Television for the VCR” (page 15). 

6. If the problem still exists repeat steps 1 to 5 moving several 

more channels away from the original setting.

If you are unable to solve the problem after reading the above instructions, note:

The model and serial number on the rear of your VCR

The warranty information

A clear description of the problem

Then contact your nearest SAMSUNG after-sales service.

Technical Specifications

MODEL                                          SV-L620K

SV-L80K/SV-L30K

Design and specifications are subject to change without notice.

Format

VHS PAL/SECAM standard

VHS PAL/SECAM standard

Heads

Video: 4 rotary heads

Video: 4 rotary heads (SV-L80K)

Hi-Fi audio : 2 rotary heads

Video: 2 rotary heads (SV-L30K)

Audio/Control: 1 stationary head

Audio/Control: 1 stationary head

Erase: 1 full track erase head

Erase: 1 full track erase head

Receiving channel

VHF-I, VHF-III, UHF, Interband/

VHF-I, VHF-III, UHF, Interband/

Hyperband

Hyperband

Television system

STANDARD B/G-D/K

STANDARD B/G-D/K

Luminance

FM azimuth recording

FM azimuth recording

Colour system

PAL/MESECAM/NT4.43 : Down converted PAL/MESECAM/NT4.43: Down converted
subcarrier phase shifted direct recording

subcarrier phase shifted direct recording

SECAM: 1/4 converted down subcarrier

SECAM: 1/4 converted down subcarrier

direct recording

direct recording

NTSC PB on PAL TV

NTSC PB on PAL TV

Tape speed

SP   23.39 mm/sec

SP   23.39 mm/sec

LP   11.69 mm/sec

LP   11.69 mm/sec (SV-L80K)

Recording/playback time

SP   3 hours (E-180 Tape)

SP   3 hours (E-180 Tape)

LP   6 hours (E-180 Tape)

LP   6 hours (E-180 Tape) (SV-L80K)

REW time

About 60 sec in REW with E-180

About 60 sec in REW with E-180

VIDEO

Input

0.5 to 2.0 Vp-p; 75 ohm unbalanced

0.5 to 2.0 Vp-p; 75 ohm unbalanced

Output

1.0 ± 0.2 Vp-p; 75 ohm unbalanced

1.0 ± 0.2 Vp-p; 75 ohm unbalanced

Signal-to-noise ratio

Better than 43 dB (SP)

Better than 43 dB 

Horizontal resolution

More than 240 lines

More than 240 lines

AUDIO

Input

-8 dBm, 47 Kohm unbalanced

-8 dBm, 47 Kohm unbalanced

Output

-8 ± 3 dBm, 1 Kohm unbalanced

-8 ± 3 dBm, 1 Kohm unbalanced

Wow and flutter (WTD)

0.4% max (SP)

0.4% max  

Signal-to-noise ratio

68 dB min (IHF A filter)

42 dB min (IHF A filter)

Frequency response

20Hz - 20kHz

100Hz - 8kHz

Power requirement

110-240V~, 50/60 Hz

110-240V~, 50/60 Hz

Power consumption

Approx. 12 watts

Approx. 10 watts

Operation temperature

41°F-104°F (5°C-40°C)

41°F-104°F (5°C-40°C)

Operation humidity

10%-75%

10%-75%

Weight

2.8 Kg (net)

2.8 Kg (net)

Dimensions (WxHxD)

360 x 94 x 240 mm

360 x 94 x 240 mm

GB

GB

02001A SV-L620K/DIN-GB4  6/19/03 2:57 PM  Page 44

Summary of Contents for SV-L620K


























Reviews: