Samsung SV-DVD1E Service Manual Download Page 73

Page: 73 / 90

Samsung Electronics

11-1

11. Schematic Diagrams

♦

Block Identification of Main PCB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-2

11-1 S.M.P.S. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-3

11-2 Power Drive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-4

11-3 Function-Timer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-5

11-4 System Control/Servo - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-6

11-5 A/V - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-7

11-6 TM-Block - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-8

11-7 Digital Audio - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-9

11-8 Hi-Fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-10

11-9 OSD - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-11

11-10 Input-Output - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-12

11-11 A2/NICAM - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-13

11-12 SECAM (OPTION) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-14

11-13 DVD Main-Micom - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-15

11-14 Servo - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-16

11-15 AV Decoder - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-17

11-16 DVD Deck - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-18

For schematic Diagram
- Resistors are in ohms, 1/8W unless otherwise noted.

Note

Special note :

Most semiconductor devices are electrostatically sensitive and therefore require the special handling techniques described under the
“electrostatically sensitive (ES) devices” section of this service manual.

Note :

Do not use the part number shown on this drawing for ordering. The correct part number is shown in the parts list (may be slightly

different or amended since this drawing was prepared).

Important safety notices :

Components identified with the mark have the special characteristics for safety. When replacing any of these components.
Use only the same type.

VCR Main PCB

DVD Main PCB

Summary of Contents for SV-DVD1E



























































































Search results

Summary of Contents for SV-DVD1E

Reviews:

Related manuals for SV-DVD1E

Brands by name

Popular brands

Samsung SV-DVD1E, Service Manual

Search results

Summary of Contents for SV-DVD1E

Reviews:

Related manuals for SV-DVD1E

Brands by name

Popular brands