_
maintenance
Maintenance
maintenance
_
Note:
The Dust Bin may be washed in warmwater with a mild detergent.
Reassemble and makesure it is completely
dry before using again.
To maintain maximum cleaning performance, the following maintenance
steps must be performed:
1. Empty the Dust Bin when the dirt reaches the “MAX”
line on the side.
2. Cleaning the Grille Cyclone when the Dust Bin
become clogged.
3. Check the Pre-Motor Filter at least once a month and
clean or replace as needed.
4. Replace the Post-Motor Filter every three to six
months.
Note:
More frequent filter cleaning or replacing may
be necessary if you are vacuuming new carpet,
fine dust, or have allergy concerns. Follow the
instructions on the following pages to perform
these simple maintenance steps.
EMpTY dUST bIN
The Dust Bin needs to be emptied when the dirt reaches the “MAX” line on the
side of it.
1. Unplug cleaner from electrical outlet.
2. To remove the Dust Bin from the vacuum body, push the Dust Bin release button as shown.
3. Hold dust bin and push down bin release empty button to empty
dirt into garbage container as shown.
WARNING
To reduce the risk of electronic
shock, turn Power Switch OFF
and disconnect polarized plug
from electrical outlet before
performing maintenance or
troubleshooting checks.
Tip:
For maximum cleaning
performance, check and
clean or replace all filters as
suggestsd.
clEANINg THE gRIllE
If the suction is weak although the dust bin is empty, open the cover and clean the Grille.
Note:
Whenever the Grille is clogged, check the pre-motor filter and clear it.
Grille
Cyclone
DJ68-00450A(0.1)-EN-0906.indd 8
2008.9.6 2:3:16 PM
