background image

Precautions

Copyright© 1995-2012 SAMSUNG. All rights reserved. 

1-3

<Table. 1-2 Warranty Period for components>

Types of consumer damages

Compensation

Failing to perform or 
failing to function properly 
under normal use

Required for essential repair within 10 days 

after the purchase

Replace the prod-

uct or refund

-

Required for essential repair within one 

month after the purchase

Replace the 

product or repair 

at free of charge

Repair charges

Applicable 

to repair

Problem occurred twice 

due to same malfunction

Free of charge

Problem occurred three 

times due to same 

malfunction

Replace the prod-

uct or refund

Repair charges

Problem occurred four 

times due to some other 

malfunction

Not applicable 

to repair

Within the period with 

respect to retaining 

components

Replace the product at the cost of the 

depreciated value or refund its price 

added 10% of depreciation

Failing to perform or 
failing to function properly 
as a result of willful intent 
and negligence of 
customer

Applicable repair

Repair charges

Not applicable to repair

(Except for defects or malfunction as a result 

of fire or flood or other natural disasters

Replacement 

charge

Repair charge and replace the prod-

uct at the cost of the depreciated value

(4) Repair Claims

1) Repair free of charge

    Essentially, the following causes of damage are covered:

      a. Failing to function properly under normal use during the limited warranty period.

      b. Repair Services free of charge is granted for the performance of a specific contract.

2) Repair charges

    This warranty does not cover damage caused by:

   

       a. Defect occurring after the expiration of the Warranty Period.

       b. Damage due to negligence, immersion in water, impact, loss and tampering.

       c. Repair or alteration performed by any party other than Samsung authorized technicians.

       d. Misuse or other improper use of the power button.

       e. Exhausted parts such as batteries, lamps and filters, etc.

       f. Defect that occurs due to sand, dirt liquid, etc. entering the inside of the product casing.

       g. Consumable parts which have ceased working through normal use such as as earphone, battery discharger and various accessories.

       h. Products purchased second hand or any damage that occurs due to a second hand or repair performed 

           by anyone other than Samsung or a Samsung authorized service station.

       i. Fire, earthquake, flood or other natural disasters.

        The warranty cover period for components is listed below as per table 1-2.

Summary of Contents for ST76






















































































Reviews: