2.3 Product
Outlook
：
3. Prepare to use the headphone
3.1
Power Supply and Charging:
3.1.1 As soon as power supply button switch to “OFF” during re-charging, the product could be
functioned normally. The power consume will only supply from DC adapter.
3.1.2 The battery must be charged with the appropriate charger, one DC5V adapter has been
enclosed in the package.
3.1.3 Connect the adapter into an electrical outlet. Plug the adapter’s connector into charging
port.
3.1.4 While charging, the amber indicator light will stay on and remains light until the charging is
completed. When the charging is completed, the green indicator will remained to instead.
Charging time is about 2 hours. (It takes 3 hours to fully charge power at the very first time)
3.1.5 You can now take the adapter’s connector out from the headphone and disconnect the
adapter from the electrical outlet.
3.2
Pairing and Establish a Connection
Please make sure you have paired the product with Bluetooth AV sources before you start to use.
Kindly following the pairing procedure shows hereunder:
3.2.1 Turn your Bluetooth stereo headphone on by press and hold the “TALK “button till indication
blinks rapidly. At this moment, the product is in the pairing mode
3.2.2 To activate Bluetooth devices searching from your Bluetooth AV sources by follow their
original instruction. Please choose the device name and enter the pass key “1234” to
establish a pairing connection.
3.2.3 The headphone supports two audio connections. Please select handsfree/headset profile if
you like to connect to the mobile phone. Or A2DP profile for stereo sound effect to your audio
sourcing.
Note: If the pairing fails, the blue indicator keep blinking about 60 seconds then blue
indicator blink rapidly once every 2 second automatically. A re-pairing procedure is
needed. Please refer to step pairing procedure above.
