C
HAPTER
T
HREE
: TV O
PERATION
3
.13
O
P E R AT I O N
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-
ber, “*”, or a blank. When the DISPLAY button is pressed, the channel label will appear
next to the channel number.
1
Press
CH
or
CH
to tune to the channel that will be labeled.
2
Press the
Menu
button.
Press the
CH
button to
select “Channel”, then
press the
VOL +
button.
Channel
Antenna
: A
ANT/CATV
: ANT
Auto Program
Fav. Channel
Fine Tune
: 00
Add/Erase
Labeling
: - - - -
3
Press the
CH
button to
select “Labeling”.
Press the
VOL +
button to
begin labeling.
The left-most field will be
highlighted.
(Each label has four fields.
See top paragraph.)
Channel
Antenna
: A
ANT/CATV
: ANT
Auto Program
Fav. Channel
Fine Tune
: 00
Add/Erase
Labeling
: - - - -
4
Press the
CH
or
CH
button to select a letter,
a number, or a blank.
(Press the
CH
or
CH
button results in this
sequence: A,B,...Z, blank,
0,1,...9).
Channel
Antenna
: A
ANT/CATV
: ANT
Auto Program
Fav. Channel
Fine Tune
: 00
Add/Erase
Labeling
: A - - -
5
Press the
VOL +
button
switch to the next field,
which will be highlighted.
Select a second letter or
digit pressing the
CH
or
CH
button, as above.
Repeat the process to
select the last two digits.
Channel
Antenna
: A
ANT/CATV
: ANT
Auto Program
Fav. Channel
Fine Tune
: 00
Add/Erase
Labeling
: A B C 1
▼
Note: You cannot select
“Labeling” in the A/V mode.
Press the
Menu
button to exit the menu.
