Samsung SSC-21, Installation Manual

Page: 15 / 40

14
4) MOUNTING BRACKET(SBR-120)
!
Overview
MOUNTING BRACKET (SBR-120) is used to install camera housing to a wall.
@
Installation
• Choose an installation site that can sufficiently support the weight of the equipments to be
installed.
• Mark the mounting holes using the house mount bracket as a template, then drill pilot
holes (8 mm diameter, 45 mm depth), and then install and secure the plastic anchors.
At this time, cut away all exposed protrusions.
• Align the housing mount bracket over the plastic anchor holes, then firmly fasten the
tapping screws.
• Install the housing according to the following CAMERA HOUSING installation method.
#
Specification
Use : Indoor
Installation : Wall
Dimensions : 75
✕
115
✕
240(W
✕
H
✕
D)
Weight : 500g
Operating Temperature : -10
°
C ~ 50
°
C
$
Accessories
Hexagon Socket Head Cap Screws ---------- 2
L- WRENCH ------------------------------------1
SCREW ------------------------------------------ 4
Plastic Anchor ----------------------------------- 4
Tapping Screw(M5
✕
J5) ---------------------- 4