18_
operating
18_
operating
4. Once you have completed this process, hold the
Ice Off button simultaneously for 3 seconds to
reset the filter schedule.
5. Lastly, run about 3L of water through water
dispenser and throw away. Make sure that water
flows clearly again before drinking.
6. See installing the water filter instructions page 11.
A newly installed water fi lter cartridge may cause
water to briefl y spurt from the water dispenser. This
is due to air getting into the line. It should pose no
problem to operation.
Ordering replacement fi lters
To order more water fi lter cartridges, contact your
authorized Samsung dealer.
USING THE DOORS
The refrigerator doors are equipped with a door
opening and closing feature that ensures that the
doors close all the way and are securely sealed.
After opening beyond a certain point, the door will
“catch” and remain open. When the door is ajar
ahead of the catch that allows it to stay open, it will
close automatically.
CHANGING THE INTERIOR
LIGHTS
Changing the LED Type Lighting
Do not disassemble or replace the LED type
Lighting.
To change the LED Type Lighting contact Samsung
service center or your authorized Samsung dealer.
CHANGING THE WATER FILTER
(OPTIONAL)
To reduce risk of water damage to your
property DO NOT use generic brands of water
fi lers in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG will not be legally responsible for any
damage, including, but not limited to property
damage caused by water leakage from use of a
generic water fi lter.
SAMSUNG Refrigerators are designed to work
ONLY WITH SAMSUNG Water Filter.
The “Filter Indicator” light lets you know when it is
time to change your water fi lter cartridge.
To give you preparation time to get a new fi lter, the
red light will come on just before the capacity of the
current fi lter runs out. Changing the fi lter on time
provides you with the freshest, cleanest water from
your fridge.
1. Remove the water filter from the box and
put a month indicator sticker on the filter
as shown. Place a sticker on the filter
that dates six months in the future. For
example, if you are replacing the water
filter in March, put the “SEP” (September)
sticker on the filter to remind you to
replace in September. Normal filter life is
about every 6 months.
2. Remove the new filter’s protective cap and remove
the old filter.
3. Position and insert the new filter into the filter
housing. Slowly turn the water filter clockwise to
align with the printing mark on the cover, locking
the filter in position. Make sure to align the water
filter label mark with the center of cover filter
printing as illustrated. Remember, do not over-
tighten.
CAUTION
WARNING
1
2
3
Turn until the
Turn until the
label aligned.
label aligned.
Cover filter
Cover filter
Sticker
Sticker
(month indicator)
(month indicator)
DA99-01745A-27.indd 18
DA99-01745A-27.indd 18
14. 7. 17.
11:35
14. 7. 17.
11:35
