10_
setting up
MAKING MINOR ADJUSTMENTS
TO THE DOORS
Remember, a level refrigerator is necessary for
getting the doors perfectly even.
If you need help, review the previous section on
levelling the refrigerator.
In the process for adjusting both the doors is the
same. Open the doors and adjust them, one at a
time, as follows:
1.
Unscrew the
nut
1
from the
lower hinge until it
reaches the upper
end of the bolt
2
.
When you
release the nut
1
, make sure that you use
the Allen wrench provided
3
to loosen the
bolt
2
in a counter-clockwise direction.
You should then be able to unscrew the nut
1
with your fi ngers.
2.
Adjust the
height difference
between the doors
by turning the
bolt
2
clockwise
or counter
clockwise
.
When you turn clockwise
, the door
will move up.
3.
After adjusting the
doors, turn the
nut
1
clockwise
until it
reaches the lower
end of the bolt,
then tighten the
bolt again with the wrench
3
to fix the nut in
place
1
.
If you do not secure the nut fi rmly, the bolt
may release.
LEVELLING THE
REFRIGERATOR
Now that the doors are back on the refrigerator, you
will want to make sure the refrigerator is level so you
can then make fi nal adjustments.
If the refrigerator is not level, it will not be possible to
get the doors perfectly even.
The front of the refrigerator is also adjustable.
When the Freezer door is lower than
the fridge
Insert a fl at-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the freezer.
When the Freezer door is higher than
the fridge
Insert a fl at-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the freezer.
Refer to the next section for the best way to
make very minor adjustments to the doors.
Leg
Leg
Screw Driver
Screw Driver
Screw Driver
Screw Driver
Leg
Leg
Adjustment part
Adjustment part
When the door of the freezer is
When the door of the freezer is
higher than the fridge
higher than the fridge
3
2
1
Wrench
Wrench
Bolt
Bolt
Nut
Nut
3
2
Wrench
Wrench
Bolt
Bolt
3
2
1
Wrench
Wrench
Bolt
Bolt
Nut
Nut
DA99-02028A (EN)-10.indd 10
DA99-02028A (EN)-10.indd 10
13. 6. 19.
10:25
13. 6. 19.
10:25
