28
ADJUST THE CLEARANCE BETWEEN THE DOORS
Making small adjustments between doors.
Adjustment part
2) Please adjust the height difference between the doors turning
the bolt (
➁
) turn clockwise( ) or counter clockwise
( ).
Please open the doors and adjust the doors as follows:
1) Release the nut (
①
) on the lower hinge until the upper end
of the bolt (
➁
).
NOTE
When you release the nut(
①
), use enclosed hex wrench (
➂
) to turn
the bolt(
➁
) a little counter clockwise to make the nut(
①
) loose with
your fingers.
NOTE
When you turn clockwise ( ), the door goes up.
➂
WRENCH
➀
NUT
➁
BOLT
NOTE
If you do not fix the nut (
①
) firmly, the bolt (
➁
) may be released.
3) After adjusting the doors, turn the nut (
①
) turn clockwise
( ) until the lower end of the bolt, then tighten
the bolt again with the wrench (
➂
) to fix the nut(
①
).
➂
WRENCH
➁
BOLT
➂
WRENCH
➁
BOLT
➀
NUT
DA99-00494B (EN)-1.3 9/3/07 10:32 AM Page 28
