Samsung SRP-350 Bixolon, Operator'S Manual

Page: 17 / 31

0, 48 Left justification
1, 49 Centering
2, 50 Right justification
ESC c 3 n
[Name]
Select paper sensor(s) to output paper end signals.
[Format] ASCII ESC c 3 n
Hex 1B 63 33 n
Decimal 27 99 51 n
[Range] 0 ≤ n ≤ 255
[Description] Selects the paper sensor(s) to output paper end signals.
Each bit of n is used as follows:
Bit Off/On Hex Decimal Function
Off 00 0 Paper roll near-end sensor disabled. 0
On 01 1 Paper roll near-end sensor enabled.
Off 00 0 Paper roll near-end sensor disabled. 1
On 02 2 Paper roll near-end sensor enabled.
Off 00 0 Paper roll end sensor disabled. 2
On 04 4 Paper roll end sensor enabled.
Off 00 0 Paper roll end sensor disabled. 3
On 08 8 Paper roll end sensor enabled.
4 – 7 - - - Undefined.
ESC c 4 n
[Name]
Select paper sensor(s) to stop printing.
[Format] ASCII ESC c 4 n
Hex 1B 63 34 n
Decimal 27 99 52 n
[Range] 0 ≤ n ≤ 255
[Description] Selects the paper sensor(s) used to stop printing when a paper-end is
detected, using n as follows:
Bit Off/On Hex Decimal Function
Off 00 0 paper roll end sensor disabled. 0
On 01 1 Paper roll end sensor enabled.
Off 00 0 Paper roll end sensor disabled. 1
On 02 2 Paper roll end sensor enabled.
2-7 - - - Undefined.
ESC c 5 n
[Name]
Enable/Disable panel buttons.
[Format] ASCII ESC c 5 n
Hex 1B 63 35 n
Decimal 27 99 53 n
[Range] 0 ≤ n ≤ 255
[Description] Enables or disables the panel buttons.
When the LSB is 0, the panel buttons are enabled.