Samsung SRN-1000, Quick Manual

Page: 4 / 8

4_ English
auto network setup
Run < iP installer_vx.xx.exe > to display the device search list.
At the initial startup, both [ auto set ] and [ Manual set ] will be grayed out.
1. Select a NVR in the search list.
Both the [ auto set ] and [ Manual set ] buttons will be activated.
2. Click [ auto set ].
The Auto Setting dialog appears.
The < iP address >, < subnet Mask >, and < gateway > will be set automatically.
3. Enter the password.
This is the login password for the “ admin ” user who
accesses the NVR. The default password is “ 4321 ”.
M
`
The default password can be exposed to a hacking thread so it is
recommended to change the password after installing the product.
`
Note that the security and other related issues caused by the
unchanged password shall be responsible for the user.
4. Click [ ok ].
Auto network setup will be completed.
connEcting wEB viEwEr
1. Open your web browser and type the IP address or URL of
NVR into the URL address box.
M
`
“ 192.168.1.200 ” is set to IP by default.
`
Set to an available IP address in IP Installer or " Network >
Connection Mode ”.
`
The URL connection will be enabled only when the DDNS connection settings have been completed.
2. A user with the admin permissions should provide the admin
ID and password. A registered user should provide the user
ID and password.
J
`
The default password can be exposed to a hacking thread so it is
recommended to change the password after installing the product.
`
Set password for your wireless network if you use the product with a wireless router. Being not protected with password or
using the default wireless router password may expose your video data to potential threat.
`
Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
M
`
It allow s up to 10 simultaneous access including the Admin and general users.
`
It does not allow multiple login of the Admin user.
`
The default ID of the admin account is “ admin ”, and the default password is “ 4321 ”.
`
Password of the Admin and general users can be changed in < Permission Management > menu of the NVR.
`
All settings are applied by the NVR’s settings.