Samsung SRD-470 User Manual Download Page 25

Page: 25 / 124

English

Description

Scene Mode

Refer to “

Live Mode

”. (Page 27)

Spot Out

Refer to “

Spot Out

”. (Page 29)

Audio On/Off

Refer to “

Audio ON/OFF

”. (Page 30)

Freeze

Refer to “

Freeze

”. (Page 30)

Stop Alarm

Stops the alarm output and the event monitoring. Refer to “

Event Monitoring

”. (Page 30)

Record/Stop

Starts/stops the standard recording.

Play

Plays the search result (data). Refer to “

Search & Play

Play

”. (Page 69)

Refer to “

Search & Play

”. (Page 66)

Backup

Refer to “

Using the DVR

Setting the Backup

”. (Page 56)

Main Menu

Accesses the main menu. Refer to the Using the DVR section. (Page 32)

Shutdown

Turns down the DVR.

Show/Hide Launcher

Shows or hides the launcher. Refer to “

View the Launcher Menu

”. (Page 26)

You can log in or out.

Single mode menu

The single mode menu is available only in Single Mode.

The context sensitive menu for the One Channel mode, in Split mode is different from that of the Single mode.

Description

Single

Select and click a desired channel in Split mode to switch to the full screen of the selected

channel.

PTZ Control

Accesses the PTZ Control menu. The PTZ menu is activated only in One-Channel Live mode.

(Page 64)

ZOOM

Enlarges the selected image. (Page 29)

PTZ

Alarm

Freeze

Single
Spot Out



PTZ Control
ZOOM
Audio



Freeze
Stop Alarm
Record
Play
Shutdown
Hide Launcher
Logout

Summary of Contents for SRD-470





























































































































Search results

Summary of Contents for SRD-470

Reviews:

Samsung SRD-470, User Manual, Page: 25 / 124

Search results

Summary of Contents for SRD-470

Reviews: