background image

write to the Free Software Foundation, Inc., 51 Franklin 
Street, Fifth Floor, Boston, MA 02110-1301 USA Also 
add information on how to contact you by electronic 
and paper mail.

You should also get your employer (if you work as a 
programmer) or your school, if any, to sign a “copyright 
disclaimer” for the library, if necessary. Here is a 
sample; alter the names: 

Yoyodyne, Inc., hereby disclaims all copyright interest in 
the library ‘Frob’ (a library for tweaking knobs) written by 
James Random Hacker.

signature of Ty Coon, 1 April 1990 Ty Coon, President 
of Vice.

OpenSSL LICENSE

Copyright (c) 1998-2006 The OpenSSL Project. All 
rights reserved. Redistribution and use in source and 
binary forms, with or without modification, are permitted 
provided that the following conditions are met:

1. Redistributions of source code must retain the above 
copyright notice, this list of conditions and the following 
disclaimer.

2. Redistributions in binary form must reproduce the 
above copyright notice, this list of conditions and the 
following disclaimer in the documentation and/or other 
materials provided with the distribution.

3. All advertising materials mentioning features or use of 
this software must display the following 
acknowledgment: “This product includes software 
developed by the OpenSSL Project for use in the 
OpenSSL Toolkit. (http://www.openssl.org/)”

4. The names “OpenSSL Toolkit” and “OpenSSL 
Project” must not be used to endorse or promote 
products derived from this software without prior written 
permission. For written permission, please contact 
[email protected].

5. Products derived from this software may not be 
called “OpenSSL” nor may “OpenSSL” appear in their 
names without prior written permission of the OpenSSL 
Project.

6. Redistributions of any form whatsoever must retain 
the following acknowledgment: “This product includes 
software developed by the OpenSSL Project for use in 
the OpenSSL Toolkit (http://www.openssl.org/)”

THIS SOFTWARE IS PROVIDED BY THE OpenSSL 
PROJECT ‘‘AS IS’’ AND ANY EXPRESSED OR 
IMPLIED WARRANTIES, INCLUDING, BUT NOT 
LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO 
EVENT SHALL THE OpenSSL PROJECT OR ITS 
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
LIMITED TO, PROCUREMENT OF SUBSTITUTE 
GOODS OR SERVICES; LOSS OF USE, DATA, OR 
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
CAUSED AND ON ANY THEORY OF LIABILITY, 
WHETHER IN CONTRACT, STRICT LIABILITY, OR 

TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
ARISING IN ANY WAY OUT OF THE USE OF THIS 
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
OF SUCH DAMAGE.This product includes 
cryptographic software written by Eric Young (eay@
cryptsoft.com). This product includes software written 
by Tim Hudson ([email protected]).

Original SSLeay License

Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.
com) All rights reserved. This package is an SSL 
implementation written by Eric Young (eay@cryptsoft.
com). The implementation was written so as to conform 
with Netscapes SSL. This library is free for commercial 
and non-commercial use as long as the following 
conditions are aheared to. The following conditions 
apply to all code found in this distribution, be it the RC4, 
RSA, lhash, DES, etc., code; not just the SSL code. 
The SSL documentation included with this distribution is 
covered by the same copyright terms except that the 
holder is Tim Hudson ([email protected]).

Copyright remains Eric Young’s, and as such any 
Copyright notices in the code are not to be removed. 
If this package is used in a product, Eric Young should 
be given attribution as the author of the parts of the 
library used. This can be in the form of a textual 
message at program startup or in documentation 
(online or textual) provided with the package.
Redistribution and use in source and binary forms, with 
or without modification, are permitted provided that the 
following conditions are met:

1. Redistributions of source code must retain the 
copyright notice, this list of conditions and the following 
disclaimer.

2. Redistributions in binary form must reproduce the 
above copyright notice, this list of conditions and the 
following disclaimer in the documentation and/or other 
materials provided with the distribution.

3. All advertising materials mentioning features or use of 
this software must display the following 
acknowledgement: “This product includes 
cryptographic software written by Eric Young (eay@
cryptsoft.com)” The word ‘cryptographic’ can be left out 
if the rouines from the library being used are not 
cryptographic related :-).

4. If you include any Windows specific code (or a 
derivative thereof) from the apps directory (application 
code) you must include an acknowledgement: “This 
product includes software written by Tim Hudson (tjh@
cryptsoft.com)”

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ‘‘AS 
IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS 
BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, OR 
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
LIMITED TO, PROCUREMENT OF SUBSTITUTE 
GOODS OR SERVICES; LOSS OF USE, DATA, OR 

Summary of Contents for SRD-1650DC

































































































































Reviews: