Samsung SR1AM70 Series, User Manual

Page: 17 / 84

ENGLISH- 17
About the boundary markers
To prevent the POWERbot from entering the following areas, place
the boundary markers on the floor in an shape at intervals of
about 5.9 in (15 cm).
About 5.9 in
(15 cm)
Boundary
markers
About 1.9 in
(5 cm)
About 5.9 in (15 cm)
Boundary
markers
Where a raised spot exceeds 1.9 in (5 cm) Where there is a slide, swing, fireplace, or any
flammable substance or moisture.
Above 0.6 in (1.5 cm)
boundary
markers
Boundary
markers
Where a threshold is higher than 0.6 in (1.5 cm) Where there is risk of falling such as near
stairs, porches, or guardrails.
Using Energy-saving mode
You can select the Energy-saving mode to save energy during battery charging. Energy-saving mode
turns off all functions except battery charging. Use it to reduce power consumption while you are away
from home for an extended period of time.
How to select or cancel Displayed icon
Press for 5 sec.
✻
About 3 seconds
later, the previous
indicator will
appear.
<SR1AM7010U* series
only>
Blinking Blinking
Note
f
If you select the Auto/Max/Manual clean mode or press the Point cleaning button, the
Energy-saving mode will be cancelled.
f
When Energy-saving mode is on, setting the schedule will cancel Energy-saving mode.
– If you select the Energy-saving mode after setting the schedule, the schedule will not be cancelled.
f
If the docking station is off, Energy-saving mode will be cancelled.
f
If the battery is completely flat, place the POWERbot on the docking station, and then press
the [Start/Stop
] button on the main body.