Section 2: Understanding Your Phone
2A: Your PCS Phone - The Basics
19
Using the Battery
Battery Capacity
Your PCS Phone is equipped with a Lithium Ion (LiIon) battery. It allows
you to recharge your battery before it is fully drained. The battery
provides approximately 2.5 hours of continuous digital talk time
(1.3 hours in analog) or approximately 168 hours of continuous digital
standby time (12 hours in analog).
When the battery reaches 5% of its capacity, the battery icon blinks. When
there are approximately two minutes of talk time left, the phone sounds
an audible alert every 30 seconds and then powers down.
Note:
Long backlight settings, searching for service, vibrate mode and
browser use affect the battery’s talk and standby times.
Tip:
Be sure to charge your phone’s battery and watch your indicator to
ensure your levels are okay.
Installing the Battery
Your PCS Phone comes with a LiIon battery. Follow these steps to
install it:
1.
Insert the battery into the opening on the back of the phone.
2.
Press down until the latch snaps into place.
Removing the Battery
To remove your battery for charging or for another reason, follow these
easy steps:
1.
So that no stored messages or numbers are lost, power off your phone
by pressing and holding the
key.
2.
Push the battery release latch up completely. The battery will
separate slightly from the phone.
3.
Lift the battery at a 45-degree angle away from the phone.
Summary of Contents for SPH-N270
