Samsung SPC-2010, User Manual

Page: 28 / 40

menu setting
28 _ menu setting
CONTROLLER SETTING
1. Press [ 3 ] on the number pad.
2. Hold down the [ SETUP ] button to enter the controller’s MAIN SETUP
mode.
3. Enter the 4-digit password.

Default Password : 4321
J

The default password can be exposed to a hacking thread so it is recommended to change the password after
installing the product.
Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
4. After changing the settings, select < YES > in the < SAVE/EXIT > menu
to save the changes and move back to the initial screen. To cancel
changes and move back to the initial screen, select <
NO > in the
< SAVE/EXIT > menu or press the [ ESC ] button.
M

To move between the options, move the joystick up or down.

To change the value of the settings, move the joystick to the right or left.

For the default settings values, please refer to the picture on the right.
Firmware Version
Displays the current version of the controller firmware.
Serial Data Transfer Standard
You can select serial communication mode from < RS485 > and < RS422 >.
[ M A I N S E T U P ]
PASSWORD [ **** ]
[

M A I N S E T U P ]
10. SAVE/EXIT
[

M A I N S E T U P ]
1. v1.00_XXXXXX
[

M A I N S E T U P

]
2. COMM : RS485